Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In several countries of central Europe, many modern residential buildings are braced by reinforced concrete (RC) and unreinforced masonry (URM) walls coupled with RC slabs. Such mixed constructions, in fact, behave better under seismic loading than buildin ...
We study the structural, magnetic, and transport properties of LaAlO3/EuTiO3/SrTiO3 heterostructures grown by pulsed laser deposition. The samples are characterized in situ by electron diffraction and scanning probe microscopy and ex situ by transport meas ...
Torque magnetometry at low temperature and in high magnetic fields B is performed on MgZnO/ZnO heterostructures incorporating high-mobility two-dimensional electron systems. We find a sawtoothlike quantum oscillatory magnetization M(B), i.e., the de Haas-v ...
The oxidation of nickel particles was studied in situ in an environmental transmission electron microscope in 3.2 mbar of O-2 between ambient temperature and 600 degrees C. Several different transmission electron microscopy imaging techniques, electron dif ...
In this study, we explored the growth kinetics of the Al-Fe intermetallic (IM) layer at the joint interface of the St-12/Al-5083 friction stir lap welds during post-weld annealing treatment at 350, 400 and 450 degrees C for 30 to 180 mm. Optical microscope ...
This protocol describes how in vivo-imaged dendrites and axons in adult mouse brains can subsequently be prepared and imaged with focused ion beam scanning electron microscopy (FIBSESEM). The procedure starts after in vivo imaging with chemical fixation, f ...
In the present study the challenge of analyzing complex micro X-ray diffraction (microXRD) patterns from cement clay interfaces has been addressed. In order to extract the maximum information concerning both the spatial distribution and the crystal structu ...
This protocol describes how dendrites and axons, imaged in vivo, can subsequently be analyzed in 3D using focused ion beam scanning electron microscopy (FIBSEM). The fluorescent structures are identified after chemical fixation and their position highlight ...
The first near-IR fluorescent turn-on sensor for the detection of nitroxyl (HNO), the one-electron reduced form of nitric oxide (NO), is reported. The new copper-based probe, CuDHX1, contains a dihydroxanthene (DHX) fluorophore and a cyclam deriv. as a Cu( ...
Pure W and W-2Y(2)O(3) materials were fabricated using powder metallurgy method. The microstructures of the materials were investigated by electron back-scattered diffraction and transmission electron microscopy techniques. Both materials contain 1-2 mu m ...