Publications associées à American Wire Gauge

Time-Domain Integration of Broadband Terahertz Pulses via Tapered Two-Wire Waveguide

In this work, we report on the implementation of a time-domain integrator device operating on arbitrary broadband Terahertz (THz) pulses. This analog signal-processing functionality is implemented by employing a two-wire waveguide (TWWG) variant, based on ...

IEEE2023

Metal-wire-embedded alumina insulating material using micro- and nanoscale 3D printing for surface flashover mitigation in a vacuum

Guang-Yu Sun

A micro- and nanoscale 3D printing technique is applied to fabricate a functional insulating material that mitigates surface discharge in a vacuum based on microscopic electron multipactor suppression. The proposed alumina ceramic insulator design consists ...

2022

Optical rotating torque sensor with nano newton-meter resolution based on a hanging torsion wire

Simon Nessim Henein, Etienne Frédéric Gabriel Thalmann, Billy Nussbaumer

This article presents a novel torque measuring setup working in the nano newton-meter range. The central novelty is a long (1 meter range) thin (diameter of a few tens of micrometers) metallic wire used instead of the relatively stiff torsion zone of the s ...

euspen2021

Lorentz Force from a Current-Carrying Wire on a Charge in Motion under the Assumption of Neutrality in the Symmetrical Frame of Reference

Marcos Rubinstein, Antonio Sunjerga

It is commonly assumed that a wire conducting an electric current is neutral in the laboratory frame of reference (the rest frame of the lattice of positive ions). Some authors consider that the wire is neutral only in a symmetrical frame of reference, in ...

2018

HTS high current cable for fusion application

Nikolay Bykovskiy

State-of-the-art magnets of fusion devices, which are based on low temperature superconductors (LTS), have almost reached their technological limits in terms of generated magnetic fields. Further progress can be made using novel high temperature supercondu ...

EPFL2017

A High-performance FPGA Architecture Using One-Level RRAM-based Multiplexers

Giovanni De Micheli, Xifan Tang, Pierre-Emmanuel Julien Marc Gaillardon

Resistive Random Access Memory (RRAM)-based routing multiplexers, built using a one-level structure, are significantly more delay efficient than state-of-art SRAM-based implementations thanks to their lower achievable on-state resistance. In addition, the ...

2017

Nuclear Quantum Effects in H+ and OH- Diffusion along Confined Water Wires

Michele Ceriotti, Mariana Rossi Carvalho

The diffusion of protons and hydroxide ions along water wires provides an efficient mechanism for charge transport that is exploited by biological membrane channels and shows promise for technological applications such as fuel cells. However, what is lacki ...

Amer Chemical Soc2016

Design Optimization of Round Strands Made by Twisted Stacks of HTS Tapes

Pierluigi Bruzzone, Davide Uglietti, Rainer Wesche

Atwisted stack of high-temperature superconducting (HTS) tapes soldered into copper profiles was used as a strand in the fabrication of the 60-kA/ 12-T HTS cable prototype at the Center for Research in Plasma Physics (CRPP). Considering the strand in gener ...

IEEE Institute of Electrical and Electronics Engineers2016

Results and analysis of the hot-spot temperature experiment for a cable-in-conduit conductor with thick conduit

Pierluigi Bruzzone, Kamil Sedlák

In the design of future DEMO fusion reactor a long time constant (similar to 23 s) is required for an emergency current dump in the toroidal field (TF) coils, e.g. in case of a quench detection. This requirement is driven mainly by imposing a limit on forc ...

Elsevier Sci Ltd2015

Cast aluminium microwires : processing and plastic deformation

Jérôme Krebs

Plasticity size effects have been the focus of strong recent interest due to the miniaturization of devices such as actuators and different medical apparatuses. Devices with a sub-micrometre dimension have a high market potential and therefore a thorough u ...

EPFL2015