Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The two-dimensional (2D) debonding behavior of GFRP/balsa sandwich panels presenting embedded circular disbonds at the face sheet/core interface was experimentally investigated. The bottom of the panels was fixed and out-of-plane quasi-static tensile loads ...
The blade tip clearance loss was studied experimentally and numerically for a micro radial fan with a tip diameter of 19:2mm. Its relative blade tip clearance, i.e., the clearance dividedby the blade height of 1:82mm, was adjusted with different shims. The ...
Experimental and numerical investigations were performed in order to develop a technique of active flow control by aspiration applied to an annular axial compressor cascade. Continuous aspiration is applied through shaped slots located on the suction side ...
Compressor surge events are unsafe operating regimes yielding highly unsteady flow fields in which complex aeroelastic phenomena occur. If the blade flutter and forced response behaviour (i.e. aeroelastic stability) can be predicted reliably for normal flo ...
The appearance of gas-filled vortices at the tip of hydraulic machines blades is usually associated with increase of losses, vibrations, noise and erosion risk. The understanding of the roll-up region, where the boundary layer on the pressure side crosses ...
