Concept
Télescope à miroir liquide
Personnes associées (19)
John Richard Thome
John R. Thome is Professor of Heat and Mass Transfer at the Swiss Federal Institute of Technology in Lausanne (EPFL), Switzerland since 1998, where his primary interests of research are two-phase flow and heat transfer, covering both macro-scale and micro-scale heat transfer and enhanced heat transfer. He directs the Laboratory of Heat and Mass Transfer (LTCM) at the EPFL with a research staff of about 18-20 and is also Director of the Doctoral School in Energy. He received his Ph.D. at Oxford University, England in 1978. He is the author of four books: Enhanced Boiling Heat Transfer (1990), Convective Boiling and Condensation, 3rd Edition (1994), Wolverine Engineering Databook III (2004) and Nucleate Boiling on Micro-Structured Surfaces (2008). He received the ASME Heat Transfer Division's Best Paper Award in 1998 for a 3-part paper on two-phase flow and flow boiling heat transfer published in the Journal of Heat Transfer. He has received the J&E Hall Gold Medal from the U.K. Institute of Refrigeration in February, 2008 for his extensive research contributions on refrigeration heat transfer and more recently the 2010 ASME Heat Transfer Memorial Award. He has published widely on the fundamental aspects of microscale and macroscale two-phase flow and heat transfer and on enhanced boiling and condensation heat transfer.
Michel Rappaz
Après un doctorat en physique du solide (1978) de l’Ecole Polytechnique Fédérale de Lausanne (EPFL), un post-doc à Oak Ridge National Laboratory, Michel Rappaz rejoint l’Institut des matériaux de l’EPFL en 1981. Après un passage de deux ans dans un bureau d’ingénieurs, il revient à l’EPFL en 1984 où il est nommé Professeur titulaire en 1990, puis Professeur ordinaire en 2003. Après sa retraite de l’EPFL en 2015, il est actuellement Professeur émérite et consultant indépendant auprès de divers centres de recherche et industries.
Ses principaux centres d’intérêt sont les transformations de phase et la solidification, en particulier le couplage des aspects macroscopiques de transferts de chaleur et de masse à l’échelle des procédés avec les aspects microscopiques de germination-croissance des microstructures et des défauts. Parmi ses diverses réalisations, on peut mentionner le développement d’Automates Cellulaires couplés avec la méthode d’Eléments Finis (modèle CAFE) pour la prédiction des structures de grains en solidification, le développement de modèles granulaires pour la fissuration à chaud, l’application de la méthode de champ de phase pour la compréhension de diverses microstructures, la découverte de la germination assistée dans certains alliages par des phases quasicrystallines, ainsi que de nombreuses études touchant aussi bien les aspects fondamentaux de formation des structures que des aspects plus appliqués des procédés.
Certains modèles développés dans son laboratoire ont été commercialisés par une spin-off fondée en 1991 (Calcom SA), faisant partie actuellement du groupe français ESI. Michel Rappaz a initié en 1992 un cours annuel de formation continue en solidification, suivi à ce jour par plus de 900 participants venant d’une quarantaine de pays. Il collabore actuellement avec une autre spin-off du laboratoire fondée en 2014, Novamet SàrL.
Michel Rappaz a reçu de nombreux prix et distinctions, en particulier le prix Mathewson de co-auteur (1994) et auteur (1997) de l’American Mineral, Metals and Materials Society (TMS), le prix de la fondation Koerber avec les Profs Y. Bréchet et M. Asbby (1996), la médaille Sainte-Claire Deville (1996) et la Grande Médaille (2011) de la Société Française des Matériaux (SF2M), le prix Bruce Chalmers de la TMS (2002), le prix Mc Donald Memorial Lecture du Canada (2005), la médaille d’or de la Société Européenne des Matériaux (FEMS, 2013) et le prix Brimacombe de la TMS (2015). Il fait partie des “Highly-Cited Authors” de ISI, il est fellow des sociétés ASM, IOP et TMS, et a écrit plus de 200 publications et deux livres.
Nico de Rooij
Nico de Rooij is Professor Emeritus of EPFL and previous Vice-President of CSEM SA. He was Professor of Microengineering at EPFL and Head of the Sensors, Actuators and Microsystems Laboratory (
SAMLAB
) from 2009 to 2016. At
CSEM SA
he was responsible for the EPFL CSEM coordination from 2012 to 2016. His research activities include the design, micro fabrication and application of miniaturized silicon based sensors, actuators, and microsystems. He authored and coauthored over 400 published
journal papers
in these areas.
He was Professor at the University of Neuchatel and Head of the Sensors, Actuators and Microsystems Laboratory (SAMLAB) from 1982 to 2008. Since October 1990 till October 1996 and again from October 2002 until June 2008, he has been the director of the Institute of Microtechnology of the University of Neuchatel (IMT UniNE). He lectured at the Swiss Federal Institute of Technology, Zurich (ETHZ), and since 1989, he has been a part-time professor at the Swiss Federal Institute of Technology, Lausanne (EPFL). He has been appointed Vice-President of the CSEM SA in February 2008 and headed the newly created Microsystems Technology Division of CSEM SA, from 2008 until 2012. He was Director of EPFL's Institute of Microengineering (EPFL STI IMT) from 2009 to 2012, following the transfer of IMT Uni-NE to EPFL.
Dr. de Rooij is a Fellow of the IEEE and Fellow of the Institute of Physics (UK). He recieved the IEEE
Jun-Ichi Nishizawa Gold Medal
, the Schlumberger Prize as well as the
MNE Fellow Award 2016
. He was awarded a Visiting Investigatorship Program (VIP) in MEMS/NEMS Systems by the
A*STAR Science and Engineering Council (SERC)
, Singapore, hosted by
SIMTech
, for the period 2005-2008.
Prof. de Rooij is Corresponding Member of the
Royal Netherlands Academy of Arts and Sciences
and Individual Member of the
Swiss Academy of Engineering Sciences
.
He has been serving on the Editorial Boards of the
IEEE/ASME Journal of Microelectromechanical Systems (IEEE JMEMS)
,
the IEEE proceedings
,
the Journal of Micromechanics and Microengineering, JM & M,
,
the Sensors and Actuators
,and
Sensors and Materials
. He was Member of the Information and Communication technology jury of the BBVA Foundation Frontiers of Knowledge Awards from 2009 to 2012.
Dr. de Rooij is (or was) Member of numerous international steering committees of conference series as well as
technical paper review panels including the steering committee of the International Conference on Solid-State
Sensors and Actuators and of Eurosensors. He acted as European Program Chairman of Transducers '87 and General Chairman of Transducers '89, Montreux, Switzerland.
He has supervised more than 70 Ph.D. students, who have successfully completed their
Ph.D. thesis.
He received his M.Sc. degree in physical chemistry from the State University of Utrecht, The Netherlands, in 1975, and a Ph.D. degree from Twente University of Technology, The Netherlands, in 1978. From 1978 to 1982, he worked at the Research and Development Department of Cordis Europa N.V., The Netherlands.
Stéphanie Lacour
Stéphanie P. Lacour holds the Bertarelli Foundation Chair in Neuroprosthetic Technology in the School of Engineering at EPFL and leads the Laboratory for Soft Bioelectronic Interfaces. She received her PhD in Electrical Engineering from INSA de Lyon, France, and completed postdoctoral research at Princeton University and the University of Cambridge. She is the recipient of the 2006 MIT TR35, a University Research Fellowship of the Royal Society, European Research Council ERC Starting and POC Grants, and a SNSF-ERC Consolidator Grant. She was elected a 2015 Young Global Leader by the World Economic Forum.
Mohamed Farhat
M. Farhat was born in Casablanca in 1962 (Moroccan citizen). He graduated at Ecole Nationale Supérieure d'Hydraulique et de Mécanique de Grenoble (France. He joined The LMH laboratory in 1986 as research assistant. He completed in 1994 a Ph.D. thesis on Cavitation. He joined the R&D department of Hydro-Quebec in Montréal (Canada) in 1995 where he was in charge of several research projects in the areas of production and transportation of hydropower and mainly the monitoring of large hydro turbines. Since 2001, he is senior scientist at the LMH laboratory, head of the cavitation group. He is also lecturer in Master and Doctoral programs. He is member of the Doctoral Committee in Mechanics.
François Gallaire
Né le 26 février 1975, François Gallaire obtient, en 1998, le diplôme dingénieur de lEcole Polytechnique à Paris et, en 1999, un master en « Physique des liquides » à lUniversité Pierre et Marie Curie, toujours à Paris. Il rejoint ensuite le Laboratoire dhydrodynamique (LadHyX) à lEcole polytechnique où il soutient, en 2003, une thèse sur le thème des instabilités des jets tournants et sur le contrôle de léclatement tourbillonnaire sous la direction de Jean-Marrc Chomaz. En 2003, il est nommé chargé de recherche au CNRS au Laboratoire J.A. Dieudonné de lUniversité de Nice Sophia-Antipolis.En 2009, il rejoint l'EPFL pour y fonder le laboratoire des mécanique des fluides et instabilités (LFMI). Ses recherches se concentrent sur létude des propriétés fondamentales de stabilité des écoulements de fluides et sont guidées par les applications réelles, en particulier le contrôle des écoulements. Récemment, il a réalisé dimportantes contributions dans les domaines de la micro-fluidique (lanalyse de la manipulation par laser dune goutte dans un micro-canal) et la dynamique des bio-fluides (le descriptif mécanique de lanévrisme de laorte abdominale).
John Martin Kolinski
Dr. Kolinski studied Applied Mathematics (Sc.M.) and Applied Physics (Ph.D.) at Harvard University, completing a PhD under the supervision of L. Mahadevan and Shmuel Rubinstein on the role of air in droplet impact. John did his post-doc at the Hebrew University of Jerusalem in Israel supported by the Fulbright post-doctoral fellowship. At HUJI, he worked on interfacial instabilities in soft matter in the labs of Eran Sharon and Jay Fineberg. John continues his research into interfacial mechanics at EPFL in EMSI, his newly founded laboratory for the study of Engineering Mechanics of Soft Interfaces.