Brazing | EPFL Graph Search

Êtes-vous un étudiant de l'EPFL à la recherche d'un projet de semestre?

Travaillez avec nous sur des projets en science des données et en visualisation, et déployez votre projet sous forme d'application sur GraphSearch.

Découvrez-en plus sur les applications Graph.

Brazing is a metal-joining process in which two or more metal items are joined together by melting and flowing a filler metal into the joint, with the filler metal having a lower melting point than the adjoining metal. Brazing differs from welding in that it does not involve melting the work pieces. Brazing differs from soldering through the use of a higher temperature and much more closely fitted parts than when soldering. During the brazing process, the filler metal flows into the gap between close-fitting parts by capillary action. The filler metal is brought slightly above its melting (liquidus) temperature while protected by a suitable atmosphere, usually a flux. It then flows over the base metal (in a process known as wetting) and is then cooled to join the work pieces together. A major advantage of brazing is the ability to join the same or different metals with considerable strength. Process Brazing has many advantages over other metal-join

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Publications associées (6)

Publications associées

Chargement

Personnes associées

Chargement

Unités associées

Chargement

Concepts associés (42)

Concepts associés

Chargement

Cours associés (9)

Cours associés

Chargement

Séances de cours associées (13)

Séances de cours associées

Chargement

Solutions for thermally mismatched brazing operations for ceramic tokamak magnetic sensor

Caroline Jacq, Xinyue Jiang, Thomas Maeder, Peter Ryser, Duccio Testa, Matthieu Toussaint, Philipp Windischhofer

To monitor high-frequency fluctuations of the equilibrium magnetic field in tokamaks, a 3D magnetic sensor has been developed. The sensor, which is positioned inside the vacuum vessel behind the protective tiles of the tokamak and is exposed to potential temperatures up to 400°C, is based on thick-film and LTCC (low-temperature co-fired ceramic) technology. To connect the sensor to the cabling that runs inside the vacuum vessel, mineral-insulated cables have to be brazed to the sensor to ensure electrical connection together with mechanical robustness and sufficient thermal stability. As the brazing temperature is about 600°C, direct brazing to the alumina sensor substrate can cause failure by cracking induced by thermal stresses. It arises both by temperature gradients stemming from the localised heating and by the high thermal mismatch of alumina with the braze and wire materials. In previous work, high stresses from temperature gradients were efficiently decoupled by brazing indirectly to alumina beams attached to the main substrate, and local thermal stresses between alumina and braze/wire by using a porous metallisation. However, as the slender alumina beams protruding out of the substrate are somewhat cumbersome and fragile, three alternatives were studied in the present work: 1) testing shorter and more robust beams, 2) replacing the alumina beam by a silver wire, and 3) depositing a porous temperature- and stress-decoupling dielectric to enable direct brazing on the main alumina substrate. These solutions are characterised with respect to their mechanical robustness and of the degree of thermal decoupling with the substrate they provide.

2016

Chargement

Strength and structure of furnace-brazed joints between aluminum and stainless steel

Andreas Mortensen

American Welding Soc1999

Chargement

Porous thick-film silver metallisation for thermally mismatched brazing operations in tokamak magnetic sensor

Adrien Aymeric Thibault Corne, Lucas Güniat, Caroline Jacq, Thomas Maeder, Peter Ryser, Duccio Testa

A novel sensor based on thick-film + LTCC (low-temperature cofired ceramic) technology has been recently developed for sensing high-frequency 3D magnetic fields in tokamak fusion devices. For integration within the walls of the tokamak, the sensor has to be connected to the mineral-insulated cabling, which is carried out by brazing to ensure sufficient thermal stability. However, thermal mismatch stresses between the braze and the cable vs. the alumina substrate may cause local cracking of the latter during cooling, as the basic dense silver metallisation of the alumina does not provide a sufficient degree of stress decoupling. To address this issue, a series of porous metallisations have been formulated by incorporation of a mix of silver and fugitive graphite powder into a thick-film paste. To allow co-firing of thick, multi-layered prints. Such porous metallisations have allowed successful brazing operations, without cracking of the alumina substrate. Metallisations were assessed by measuring their electrical resistivity and shear stress have been realised as preliminary results to measure the influence of the porosity on the maximal stress before cracking.

IMAPS / ACerS2015

Chargement

MSE-464: Assembly techniques

Introduction to the assembly of materials by homogeneous or heterogeneous joints (welding, bonding, mechanical assembly). Mechanical and environmental resistance of joints.

MSE-422: Advanced metallurgy

This course covers the metallurgy, processing and properties of modern high-performance metals and alloys (e.g. advanced steels, Ni-base, Ti-base, High Entropy Alloys etc.). In addition, the principles of computational alloy design as well as approaches for a sustainable metallurgy will be addressed

MICRO-301: Manufacturing technologies

This course gives an introduction to production methods and manufacturing technologies used in microengineering. The focus is given on the understanding of physical phenomena underlying the processes, the relation between materials, manufacturing processes and design, as well as economical aspects.

Brasage

thumb|Brasage de composants électroniques. Le brasage des métaux, aussi appelé brasure, est un procédé d'assemblage permanent qui établit une liaison métallique entre les pièces réunies. Contrairement

Cuivre

Le cuivre est l'élément chimique de numéro atomique 29, de symbole Cu. Le corps simple cuivre est un métal. Généralités et corps simple Le cuivre est un élément du groupe 11, de la , un é

Soudage

Le soudage est un procédé d'assemblage permanent qui assure la continuité de la matière à assembler ; la soudure est le résultat obtenu (mais le terme est souvent utilisé pour le procédé). Cette co