Publications associées à Fil métallique

Design Optimization of Round Strands Made by Twisted Stacks of HTS Tapes

Pierluigi Bruzzone, Davide Uglietti, Rainer Wesche

Atwisted stack of high-temperature superconducting (HTS) tapes soldered into copper profiles was used as a strand in the fabrication of the 60-kA/ 12-T HTS cable prototype at the Center for Research in Plasma Physics (CRPP). Considering the strand in gener ...

Ieee-Inst Electrical Electronics Engineers Inc2016

Determination of the Elastic Behavior of Silicon Nanowires within a Scanning Electron Microscope

Yusuf Leblebici, Zuhal Tasdemir

Three-point bending tests were performed on double-anchored, < 110 > silicon nanowire samples in the vacuum chamber of a scanning electron microscope ( SEM) via a micromanipulator equipped with a piezoresistive force sensor. Nanowires with widths of 35nm a ...

Hindawi Limited2016

Methods and systems for pin-efficient memory controller interface using vector signaling codes for chip-to-chip communications

Mohammad Amin Shokrollahi, Anant Pratap Singh

Systems and methods are described for transmitting data over physical channels to provide a high speed, low latency interface such as between a memory controller and memory devices. Controller-side and memory-side embodiments of such channel interfaces are ...

2016

Plasticity of microcast aluminium wires

Andreas Mortensen, Jérôme Krebs, Suzanne Godelieve Alphonsine Verheyden

A microcasting process is developed for the production of monocrystalline microwires of pure and alloyed aluminium. The process is based on pressure infiltration of single-crystalline salt moulds; it is capable of producing wires with a diameter between 6 ...

2015

An Improved Formula for the Transfer Impedance of Two-Layer Braided Cable Shields

Nicolas Mora Parra

In this letter, we propose a formula for evaluating the transfer impedance of two-layer braided cable shields. The proposed formula results from the combination of the model proposed by Vance for the evaluation of the equivalent transfer impedance of a two ...

Ieee-Inst Electrical Electronics Engineers Inc2015

Development of HTS Conductors for Fusion Magnets

Pierluigi Bruzzone, Davide Uglietti, Rainer Wesche

In view of the development of cables for next-generation fusion reactors, research activities are carried out on all HTS materials available from industrial production. Preliminary design of a react and wind cable using Bi-2212 wires is carried out, inspir ...

2015

Results and analysis of the hot-spot temperature experiment for a cable-in-conduit conductor with thick conduit

Pierluigi Bruzzone, Kamil Sedlák

In the design of future DEMO fusion reactor a long time constant (similar to 23 s) is required for an emergency current dump in the toroidal field (TF) coils, e.g. in case of a quench detection. This requirement is driven mainly by imposing a limit on forc ...

Elsevier Sci Ltd2015

Porous thick-film silver metallisation for thermally mismatched brazing operations in tokamak magnetic sensor

Duccio Testa, Peter Ryser, Lucas Güniat, Thomas Maeder, Caroline Jacq, Adrien Aymeric Thibault Corne

A novel sensor based on thick-film + LTCC (low-temperature cofired ceramic) technology has been recently developed for sensing high-frequency 3D magnetic fields in tokamak fusion devices. For integration within the walls of the tokamak, the sensor has to b ...

IMAPS / ACerS2015

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Fil métallique

Design Optimization of Round Strands Made by Twisted Stacks of HTS Tapes

Determination of the Elastic Behavior of Silicon Nanowires within a Scanning Electron Microscope

Methods and systems for pin-efficient memory controller interface using vector signaling codes for chip-to-chip communications

Plasticity of microcast aluminium wires

An Improved Formula for the Transfer Impedance of Two-Layer Braided Cable Shields

Development of HTS Conductors for Fusion Magnets

Cast aluminium microwires

Results and analysis of the hot-spot temperature experiment for a cable-in-conduit conductor with thick conduit

Characterization of Mechanical Properties of MgB2 Conductor for the Superconducting Link Project at CERN

Porous thick-film silver metallisation for thermally mismatched brazing operations in tokamak magnetic sensor

Graph Chatbot

Chattez avec Graph Search

Determination of the Elastic Behavior of Silicon Nanowires within a Scanning Electron Microscope

Plasticity of microcast aluminium wires

Design Optimization of Round Strands Made by Twisted Stacks of HTS Tapes

Cast aluminium microwires

Development of HTS Conductors for Fusion Magnets

Methods and systems for pin-efficient memory controller interface using vector signaling codes for chip-to-chip communications

Results and analysis of the hot-spot temperature experiment for a cable-in-conduit conductor with thick conduit

An Improved Formula for the Transfer Impedance of Two-Layer Braided Cable Shields

Characterization of Mechanical Properties of MgB2 Conductor for the Superconducting Link Project at CERN

Porous thick-film silver metallisation for thermally mismatched brazing operations in tokamak magnetic sensor