Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The microstructural evolution of deformed 304L stainless steel during static recrystallization and grain growth was characterized by EBSD within an SEM chamber, which enabled microstructural and crystallographic information to be determined. The experiment ...
K41X is a ferritic stainless steel grade which was successfully developed in exhaust gas manifold where the temperature could reach 950°C. It contains about 18% wt of chromium and it is stabilized with both titanium and niobium to warranty a good weldabili ...
Ferritic/martensitic (FM) steels, F82H and Optimax-A, were irradiated up to 11.3 dpa/1175 appm He in Target-3 of the Swiss Spallation Neutron Source (SINQ). To investigate helium-induced hardening effect, micro-hardness and microstructure of the irradiated ...
The biomedical industry has an increasing demand for dissimilar metal joining processes, which are used for complex configuration designs, such as guidewires and other intravascular interventional devices. Their production becomes more and more challenging ...
The biomedical industry shows increasing interest in the joining of dissimilar metals, especially with the aim of developing devices that combine different mechanical and corrosive properties. As an example, nickel titanium shape memory alloys joined to st ...
Recrystallization, which can occur dynamically or statically, is an important phenomenon causing microstructure changes in deformed metals and therefore affecting the properties of the material. Even though extensive investigations have been carried out on ...
The HiRadMat (High-Radiation to Materials) facility will allow testing of accelerator components, in particular those of the Large Hadron Collider (LHC) at CERN, under the impact of high-intensity pulsed beams. To reach this intensity range, the beam will ...
In order to better understand the microstructure that forms during laser welding of an 18 carat gold and an austenitic stainless steel, solidification of the Au-Fe binary analog has been studied using thermal analysis and interrupted Bridgman experiments. ...
The paper describes a new model of discontinuous dynamic recrystallization (DDRX) which can operate in constant or variable thermomechanical conditions. The model considers the elementary physical phenomena at the grain scale such as strain hardening, reco ...
The goal of this project was to develop low-firing thick-film materials systems for the fabrication of piezoresistive sensors on special steels, for the fabrication of instrumented medical devices. To this end, a series of individual thick-film materials a ...