Christian C. Enz (M84, S'12) received the M.S. and Ph.D. degrees in Electrical Engineering from the EPFL in 1984 and 1989 respectively. From 1984 to 1989 he was research assistant at the EPFL, working in the field of micro-power analog IC design. In 1989 he was one of the founders of Smart Silicon Systems S.A. (S3), where he developed several low-noise and low-power ICs, mainly for high energy physics applications. From 1992 to 1997, he was an Assistant Professor at EPFL, working in the field of low-power analog CMOS and BiCMOS IC design and device modeling. From 1997 to 1999, he was Principal Senior Engineer at Conexant (formerly Rockwell Semiconductor Systems), Newport Beach, CA, where he was responsible for the modeling and characterization of MOS transistors for the design of RF CMOS circuits. In 1999, he joined the Swiss Center for Electronics and Microtechnology (CSEM) where he launched and lead the RF and Analog IC Design group. In 2000, he was promoted Vice President, heading the Microelectronics Department, which became the Integrated and Wireless Systems Division in 2009. He joined the EPFL as full professor in 2013, where he is currently the director of the Institute of Microengineering (IMT) and head of the Integrated Circuits Laboratory (ICLAB).He is lecturing and supervising undergraduate and graduate students in the field of Analog and RF IC Design at EPFL. His technical interests and expertise are in the field of very low-power analog and RF IC design, semiconductor device modeling, and inexact and error tolerant circuits and systems.He has published more than 200 scientific papers and has contributed to numerous conference presentations and advanced engineering courses. Together with E. Vittoz and F. Krummenacher he is one of the developer of the EKV MOS transistor model and the author of the book "Charge-Based MOS Transistor Modeling - The EKV Model for Low-Power and RF IC Design" (Wiley, 2006). He has been member of several technical program committees, including the International Solid-State Circuits Conference (ISSCC) and European Solid-State Circuits Conference (ESSCIRC). He has served as a vice-chair for the 2000 International Symposium on Low Power Electronics and Design (ISLPED), exhibit chair for the 2000 International Symposium on Circuits and Systems (ISCAS) and chair of the technical program committee for the 2006 European Solid-State Circuits Conference (ESSCIRC). Since 2012 he has been elected as member of the IEEE Solid-State Circuits Society (SSCS) Administrative Commmittee (AdCom). He is also Chair of the IEEE SSCS Chapter of Switzerland.
Prof. Dr. Anton J. Schleiss graduated in Civil Engineering from the Swiss Federal Institute of Technology (ETH) in Zurich, Switzerland, in 1978. After joining the Laboratory of Hydraulic, Hydrology and Glaciology at ETH as a research associate and senior assistant, he obtained a Doctorate of Technical Sciences on the topic of pressure tunnel design in 1986. After that he worked for 11 years for Electrowatt Engineering Ltd. (now Pöyry) in Zurich and was involved in the design of many hydropower projects around the world as an expert on hydraulic engineering and underground waterways. Until 1996 he was Head of the Hydraulic Structures Section in the Hydropower Department at Electrowatt. In 1997, he was nominated full professor and became Director of the Laboratory of Hydraulic Constructions (LCH) in the Civil Engineering Department of the Swiss Federal Institute of Technology Lausanne (EPFL). The LCH activities comprise education, research and services in the field of both fundamental and applied hydraulics and design of hydraulic structures and schemes. The research focuses on the interaction between water, sediment-rock, air and hydraulic structures as well as associated environmental issues and involves both numerical and physical modeling of water infrastructures. In May 2018, he became Honorary Professor at EPFL. More than 50 PhD and Postdoc research projects have been carried out under his guidance. From 1999 to 2009 he was Director of the Master of Advanced Studies (MAS) in Water Resources Management and Hydraulic Engineering held in Lausanne in collaboration with ETH Zurich and the universities of Innsbruck (Austria), Munich (Germany), Grenoble (France) and Liège (Belgium). From 2006 to 2012 he was the Head of the Civil Engineering program of EPFL and chairman of the Swiss Committee on Dams (SwissCOLD). In 2006, he obtained the ASCE Karl Emil Hilgard Hydraulic Price as well as the J. C. Stevens Award. He was listed in 2011 among the 20 international personalities that “have made the biggest difference to the sector Water Power & Dam Construction over the last 10 years”. Between 2014 and 2017 he was Council member of International Association for Hydro-Environment Engineering and Research (IAHR) and he was chair of the Europe Regional Division of IAHR until 2016. For his outstanding contributions to advance the art and science of hydraulic structures engineering he obtained in 2015 the ASCE-EWRI Hydraulic Structures Medal. The French Hydro Society (SHF) awarded him with the Grand Prix SHF 2018. After having served as vice-president between 2012 and 2015 he was president of the International Commission on Large Dams (ICOLD) from 2015 to 2018. On behalf of ICOLD he his the coordinator of the EU Horizon 2020 project "Hydropower Europe". With more than 40 years of experience he is regularly involved as a consultant and expert in large water infrastructures projects including hydropower and dams all over the world. Awards (besides those mentioned above): ASCE-Journal of Hydraulic Engineering Outstanding Reviewer Recognition 2013 ASCE-EWRI-Journal of Hydraulic Engineering 2014 Best Technical Note
After studies in Geneva (TECFA) and Pittsburgh (LRDC) I joined EPFL in 2003 to coordinate eLearning projects and conduct research in the field of Computer Supported Collaborative Learning (CSCL). Starting 2013 I am responsible for MOOCs production at the Center for Digital Education (CEDE).Former Associate Editor for the IEEE Transactions on Learning Technologies and former Member of the Editorial Board for the International Journal of Computer Supported Collaborative Learning (iJCSCL). Specialties: Interaction analysis, research methods, statistical methods, prototyping, software development, pedagogical design.
Jeffrey Huang is the Director of the Institute of Architecture at EPFL (starting May 1, 2020), that comprises 25 laboratories and groups. He is also the Head of the Media x Design Laboratory and a Full Professor in Architecture and Computer Science, at the Faculty of Computer and Communication Sciences (IC), and at the Faculty of Architecture, Civil and Environmental Engineering (ENAC). He holds a DiplArch from ETH Zurich, and Masters and Doctoral Degrees from Harvard University, where he was awarded the Gerald McCue medal for academic excellence. He started his academic career as a researcher at MIT’s Sloan School of Management (Center for Coordination Sciences). In 1998 he returned to Harvard as an Assistant Professor of Architecture and was promoted to Associate Professor in 2001. In 2006 he was named Full Professor at EPFL in Switzerland where he holds joint professorships at I&C and ENAC, and heads the Media x Design Lab. He was also a Visiting Professor at Tsinghua University, a Visiting Fellow at Stanford University’s d.school, a Honorary Visiting Professor at the University of Sheffield, and a Berkman Fellow and Faculty Associate at Harvard University (Berkman Klein Center for Internet & Society). Professor Huang’s research examines the convergence of physical and digital architecture. His recent work investigates new artificial design paradigms (design decoding and encoding), theories of experience design, and the application of algorithmic urbanism in Chinese cities. His current teaching examines the possible role of artificial intelligence in architecture (see MxD studios). In collaboration with Muriel Waldvogel, he heads Convergeo, an award-winning, international strategic and experience design firm. From 2014-2017, while on leave from EPFL, he led the creation of a ground-breaking, new school of architecture in Singapore, as the Head of the Architecture and Sustainable Design Pillar at the Singapore University of Technology and Design (SUTD), established in collaboration with MIT.
Amir Firouzeh received the B.Sc. degree from the University of Tehran, Tehran, Iran, and the M.Sc. degree from Sharif University, Tehran, in 2009 and 2012, respectively, both in mechanical engineering, and the Ph.D. degree in robotics, control, and intelligent systems from the Swiss Federal Institute of Technology, Lausanne, Switzerland, in 2017. He is currently a Research Assistant with the Reconfigurable Robotics Laboratory, Swiss Federal Institute of Technology. His research interests include novel sensing, actuation, and manufacturing technologies for soft robots towards their application in inherently compliant wearable devices for safe human interaction.
Depuis 2007
Fondateur et directeur de l'EPFL ECAL Lab.
Quelques projets marquants:
Sunny Memorie avec l'ECAL, l'ENSCI-Les Ateliers (Paris), le Royal College of Arts (Londres), le California College of the Arts (San Francisco)
Give Me More (Réalité Augmentée)
Hidden Carbon (Matériaux composites, avec l'ECAL etl'ENSCI-Les Ateliers (Paris)
Cours postgrade: certificate of Advanced Studies en Réalité Augmentée
Depuis oct. 2000
Adjoint du Président de l'EPFL pour la communication
1998-2000
Présentateur et chef d'édition du Journal Télévisé /Télévision suisse romande
1994-2000
Journaliste-reporter, Télévision Suisse romande
1994-2000
Fondateur et directeur de ICAT (Institut pour la communication et l'analyse de Technologies )
1991-2000
Journaliste scientifique au Journal de Genève (formation professionnelle RP)
1986-1991
Etudes et diplôme d'ingénieur en sciences des matériaux, EPFL. Prix Matériaux 91
Since 1999 Philippe Flückiger is the Director of Operations at the EPFL Center of MicroNanoTechnology, a world-class state-of-the-art cleanroom dedicated to research and development in the field of MEMS. He received his diploma in physics from the University of Neuchâtel, Switzerland in 1987 and his PhD from the same University in 1993. His thesis work was dedicated to the deposition, patterning and characterization of high temperature superconductor epitaxial thin films. From 1993 to 1994 he was a post doc at Stanford University to develop submicron lithography with the atomic force microscope in the group of Calvin Quate, inventor of the AFM. From 1995 to 1997 he was successively process engineer, project manager and process engineering manager at Micronas SA in Bevaix, Switzerland, a microelectronics company producing baseband processors and voltage regulators for wireless applications, mostly ASICs for Nokia Mobile Phones. In 1997 he spent 4 months in the production line of EM Microelectronic Marin SA, Switzerland, a semiconductor manufacturer specialized in the design and production of ultra low power, low voltage integrated circuits for battery-operated and field-powered applications. He joined then the Swiss Federal Institute of Technology in Lausanne (EPFL) to start the new activity in diffusion, oxidation and CVD at the Center of MicroNanoTechnology. He was appointed Director of Operations of the Center in 1999.
