Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Christophe MoserChristophe Moser is Associate Professor of Optics and the Section Director in the Microengineering department at EPFL. He obtained his PhD at the California Institute of Technology in optical information processing in 2000. He co-founded and was the CEO of Ondax Inc (acquired by Coherent Inc.), Monrovia California for 10 years before joining EPFL in 2010. His current interests are ultra-compact endoscopic optical imaging through multimode fibers, multimode fiber lasers, retinal imaging and additive manufacturing via volumetric 3D printing with light. He is the co-founder of Composyt light lab in the field of head worn displays in 2014 (acquired by Intel Corp), Earlysight SA and Readily3D. He is the author and co-author of 75 peer reviewed publications and 45 patents.
Henning Paul-Julius StahlbergPositions:
Since 2020 Prof. Physics, IPHYS, SB, EPFL, Switzerland 2009 – 2021 Prof. Structural Biology, Biozentrum, University Basel, Switzerland
2009 – 2010 Adj. Assoc. Prof. Molecular & Cellular Biology, UC Davis, CA, USA
2007 – 2009 Assoc. Prof. Molecular & Cellular Biology, UC Davis, CA, USA
2003 – 2007 Assist. Prof. Molecular & Cellular Biology, UC Davis, CA, USA
Education: 2002 Habilitation, Biozentrum, University Basel, Switzerland 1997 – 2003 Postdoctoral Fellow, Biozentrum, University Basel, Switzerland 1992 – 1997 PhD Student, EPFL, Lausanne, Switzerland 1990 – 1991 Diploma Thesis in Solid State Physics, TU Berlin, Germany 1987 – 1993 Study of Physics, TU Berlin, Germany Selected Awards & Honors: 2009 W.M.Keck Award 2004 CAREER award, NSF, USA 2002 Habilitation, University Basel, Switzerland Selected Memberships: 2008 – 2013 Chancellor’s Fellow Award, UC Davis, CA, USA 2004 – 2009 Faculty of 1000 Since 1992 Swiss Society for Optics and Microscopy (SSOM)
Yves BellouardDr. Yves Bellouard is Associate Professor in Microengineering at Ecole Polytechnique Fédérale de Lausanne (EPFL) in Switzerland, where he heads the Galatea lab and the Richemont Chair in micromanufacturing. He received a BS in Theoretical Physics and a MS in Applied Physics from Université Pierre et Marie Curie in Paris, France in 1994-1995 and a PhD in Microengineering from Ecole Polytechnique Fédérale de Lausanne (EPFL) in Lausanne, Switzerland in 2000. For his PhD work, he received the Omega Scientific prize (2001) for outstanding contribution in the field of microengineering for his work on Shape Memory Alloys. Before joining EPFL in 2015, he was Associate Professor at Eindhoven University of Technologies (TU/e) in the Netherlands and prior to that, Research Scientist at Rensselaer Polytechnic Institute (RPI) in Troy, New York for about four years where he started working on femtosecond laser processing of glass materials. From 2010 until 2013, Yves Bellouard initiated and coordinated the Femtoprint project, a European research initiative aiming at investigating a table-top printer for microsystems ('3D printing of microsystems'). In 2013, he received a prestigious ERC Starting Grant (Consolidator-2012) from the European Research Council and a JSPS Fellowship from the Japan Society for the Promotion of Science. His current research interests are on new paradigms for system integration at the microscale and in particular laser-based methods to tailor material properties for achieving higher level of integration in microsystems, like for instance integrating optics, mechanics and fluidics in a single monolith. These approaches open new opportunities for direct-write methods of microsystems (3D printing). Personal website
Martinus GijsMartin A.M. Gijs received his degree in physics in 1981 from the Katholieke Universiteit Leuven, Belgium and his Ph.D. degree in physics at the same university in 1986. He joined the Philips Research Laboratories in Eindhoven, The Netherlands, in 1987. Subsequently, he has worked there on micro-and nano-fabrication processes of high critical temperature superconducting Josephson and tunnel junctions, the microfabrication of microstructures in magnetic multilayers showing the giant magnetoresistance effect, the design and realisation of miniaturised motors for hard disk applications and the design and realisation of planar transformers for miniaturised power applications. He joined EPFL in 1997. His present interests are in developing technologies for novel magnetic devices, new microfabrication technologies for microsystems fabrication in general and the development and use of microsystems technologies for microfluidic and biomedical applications in particular.
Frédéric CourbinAprès ses études de physique fondamentale à l'Université de Paris-XI (Orsay, France), Frédéric Courbin effectue sa thèse de doctorat entre l'Institut d'Astrophysique de l'Université de Liège (Belgique), l'Observatoire de Paris (France) et l'Observatoire Européen Austral (ESO, Allemagne). En 1999, il quitte l'Europe pour trois ans, afin de poursuivre ses recherches sous le ciel pur du Chili, où l'ESO vient de terminer la construction de son VLT (Very Large Telescope), dans le désert de l'Atacama. En 2004, après un séjour de 2 ans à l'Université de Liège comme chercheur "Marie Curie", Frédéric Courbin rejoint le Laboratoire d'Astrophysique de l'EPFL où il est actuellement professeur. Ses sujets de recherche principaux se situent en cosmologie et en astrophysique extragalactique, ainsi qu'en traitement du signal. En 2018, il obtient un financement Européen (ERC Advanced grant) lié à son travail en cosmologie avec les lentilles gravitationnelles. A l'EPFL il est membre de la commission de l'école doctorale en physique (EDPY) et à été le tuteur de plus de 30 étudiants en thèse à ce jour. Depuis 2018, il est membre du Conseil de Faculté des Sciences de Bases et de l'assemblée d'école depuis 2020.
Hatice Altug2020-current Full Professor at the Institute of Bioengineering, EPFL, Switzerland2013-2020 Associate Professor (with tenure) at the Institute of Bioengineering, EPFL, Switzerland 2013 Associate Professor (with tenure) at Electrical and Computer Engineering Department of Boston University, USA 2007-2013 Assistant Professor (tenure-track) at Electrical and Computer Engineering Department of Boston University, USA 2007 Post-doctoral Fellow at Center for Engineering in Medicine of Harvard Medical School, USA 2000-2007 PhD. in Applied Physics at Stanford University, USA 1996-2000 B.S. in Physics at Bilkent University, Turkey
