Nanosheet

Résumé

A nanosheet is a two-dimensional nanostructure with thickness in a scale ranging from 1 to 100 nm. A typical example of a nanosheet is graphene, the thinnest two-dimensional material (0.34 nm) in the world. It consists of a single layer of carbon atoms with hexagonal lattices. Examples and applications , Silicon nanosheets are being used to prototype future generations of small (5 nm) transistors. Carbon nanosheets (from hemp) may be an alternative to graphene as electrodes in supercapacitors. Synthesis The most commonly used nanosheet synthesis methods use a bottom-up approach, e.g., pre-organization and polymerization at interfaces like Langmuir–Blodgett films, solution phase synthesis and chemical vapor deposition (CVD). For example, CdTe (cadmium telluride) nanosheets could be synthesized by precipitating and aging CdTe nanoparticles in deionized water. The formation of free-floating CdTe nanosheets was due to directional h

Source officielle

https://en.wikipedia.org/wiki/Nanosheet

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Publications associées (9)

Publications associées

Chargement

Personnes associées

Chargement

Unités associées

Chargement

Concepts associés (1)

Le graphène est un matériau bidimensionnel cristallin, forme allotropique du carbone dont l'empilement constitue le graphite. Cette définition théorique est donnée par le physicien en 1947. Par la

Concepts associés

Chargement

Cours associés (4)

Cours associés

Chargement

Séances de cours associées (4)

Séances de cours associées

Chargement

IrOOH nanosheets as acid stable electrocatalysts for the oxygen evolution reaction

Filip Mateusz Podjaski

In solids, heterogeneous catalysis is inherently bound to reactions on the surface. Yet, atomically efficient preparation of specific surfaces and the characterization of their properties are impeding its applications towards a clean energy future. Here, we present the synthesis of single layered IrOOH nanosheets and investigations of their structure as well as their electrochemical properties towards oxygen evolution under aqueous acidic conditions. The nanosheets are synthesized by treating bulk IrOOH with a tetrabutylammonium hydroxide solution and subsequent washing. Electron diffraction shows that the triangular arrangement of the edge sharing Ir(O,OH)(6) octahedra found in the layers of bulk IrOOH is retained after exfoliation into single layers. When incorporated as an active component in Ti electrodes, the nanosheets exhibit a Tafel slope of 58(3) mV dec(-1) and an overpotential of eta(-2)(10 mA cm) = 344(7) mV in 0.1 M HClO4, while retaining the trivalent oxidation state of iridium. They outperform bulk rutile-IrO2 and bulk IrOOH as electrocatalytic water oxidation catalysts under the same conditions. The results of this study on the structure-property relationships of low valence IrOOH nanosheets offer new pathways for the development of atom efficient, robust and highly active oxygen evolution catalysts.

2018

Chargement

Ruthenium Oxide Nanosheets for Enhanced Oxygen Evolution Catalysis in Acidic Medium

Filip Mateusz Podjaski

The fabrication of highly active and robust hexagonal ruthenium oxide nanosheets for the electrocatalytic oxygen evolution reaction (OER) in an acidic environment is reported. The ruthenate nanosheets exhibit the best OER activity of all solution-processed acid medium electrocatalysts reported to date, reaching 10 mA cm(-2) at an overpotential of only approximate to 255 mV. The nanosheets also demonstrate robustness under harsh oxidizing conditions. Theoretical calculations give insights into the OER mechanism and reveal that the edges are the origin of the high OER activity of the nanosheets. Moreover, the post OER analyses indicate, apart from coarsening, no observable change in the morphology of the nanosheets or oxidation states of ruthenium during the electrocatalytic process. Therefore, the present investigation suggests that ruthenate nanosheets are a promising acid medium OER catalyst with application potential in proton exchange membrane electrolyzers and beyond.

2019

Chargement

Tuning the chemical composition and structure for targeted functionality in two-dimensional (2D) nanosheets has become a major objective in the rapidly growing area of 2D materials. In the context of photocatalysis, both miniaturization and extending the light absorption of UV active photocatalysts are major assets. Here, we investigate the solid solution between two photocatalytic systems known from literature to evolve H-2 from water/methanol under UV-RbCa2Nb3O10 (E-g = 3.7 eV) -and visible light irradiation - RbPb2Nb3O10 (E-g = 3.0 eV) - by synthesizing hypothetical RbCa2-xPbxNb3O10. While the calcium niobate can easily be exfoliated into individual nanosheets via cation-proton exchange and subsequent treatment with tetra-n-butyl-ammonium hydroxide (TBAOH), the lead niobate barely yields nano-sheets. Spectroscopic and microscopic analysis suggest that this is caused by volatilization of Pb during synthesis, leading to a local 3D linkage of RbPb2Nb3O10 perovskite units with Pb deficient units. On the one hand, this linkage progressively prevents exfoliation along with an increasing Pb content. On the other hand, introducing Pb into the perovskite blocks successively leads to bandgap narrowing, thus gradually enhancing the light harvesting capability of the solid solution. Finding a compromise between this narrowing of the bandgap and the possibility of exfoliation, visible light sensitized nanosheets can be engineered in good yield for an initial molar ratio of Ca:Pb >= 1:1.

Wiley-V C H Verlag Gmbh2017

Chargement