An experiment was developed to simulate the interface between liquid high manganese carbon steel and solid ultra-low alloyed steel in a thermal gradient, corresponding to the nugget/sheet interface of resistance spot welds. Despite the large difference in ...
The wetting of angular alumina particle preforms by Cu-Sn alloys is investigated by means of pressure infiltration experiments conducted at 1150 A degrees C, using a system enabling dynamic and precise measurements of the metal volume injected into the pre ...
Cavitation erosion during the incubation period was investigated via pitting tests conducted on three different materials: an Aluminum alloy, a Nickel Aluminum Bronze alloy and a Duplex Stainless Steel. Pitting tests were conducted in a cavitation tunnel i ...
This article focuses on the use of spherical nanoindentation measurements to estimate the pressure of cavitation impacts and its statistical distribution. Indeed, nanoindentation techniques are supposed to represent an effective tool in this field due to t ...
Cavitation erosion prediction and characterization of cavitation field strength are of interest to industries suffering from cavitation erosion detrimental effects. One means to evaluate cavitation fields and materials is to examine pitting rates during th ...
Many commercially important alloys such as Fe-C, Fe-Ni, Cu-Zn, Cu-Sn and Ti-Al exhibit peritectic transitions on solidification. In the two-solid phase region of peritectic metallic systems, a wide spectrum of microstructures has been revealed during direc ...
Ta and Ti are the most widely used additions for technical Nb3Sn multifilamentary superconductors. These elements are known to influence grain growth, grain morphology and chemical composition in the A15 layer, hence the current carrying properties of the ...
We have analyzed the influence of the two different Ti doping methods on the superconducting properties of bronze processed (Nb,Ta,Ti)3Sn multifilamentary wires with identical configuration, consisting of a Nb7.5wt.%Ta alloy processed to 14641 filaments of ...
IEEE Institute of Electrical and Electronics Engineers2005
In this study, Al-5083 and St-12 alloy sheets were friction stir lap welded at different travel (7-23 cm min(-1)) and rotation (750-1125 rev min(-1)) speeds of the welding tool. The welded joints were characterised by various methods including shear tensil ...
