Double-clad fiber (DCF) is a class of optical fiber with a structure consisting of three layers of optical material instead of the usual two. The inner-most layer is called the core. It is surrounded by the inner cladding, which is surrounded by the outer cladding. The three layers are made of materials with different refractive indices.
There are two different kinds of double-clad fibers. The first was developed early in optical fiber history with the purpose of engineering the dispersion of optical fibers. In these fibers, the core carries the majority of the light, and the inner and outer cladding alter the waveguide dispersion of the core-guided signal. The second kind of fiber was developed in the late 1980s for use with high power fiber amplifiers and fiber lasers. In these fibers, the core is doped with active dopant material; it both guides and amplifies the signal light. The inner cladding and core together guide the pump light, which provides the energy needed to allow amplification in the core. In these fibers, the core has the highest refractive index and the outer cladding has the lowest. In most cases the outer cladding is made of a polymer material rather than glass.
In double-clad fiber for dispersion compensation, the inner cladding layer has lower refractive index than the outer layer. This type of fiber is also called depressed-inner-cladding fiber and W-profile fiber (from the fact that a symmetrical plot of its refractive index profile superficially resembles the letter W).
This type of double-clad fiber has the advantage of very low microbending losses. It also has two zero-dispersion points, and low dispersion over a much wider wavelength range than standard singly clad fiber. Since the dispersion of such double-clad fibers can be engineered to a great extent, these fibers can be used for the compensation of chromatic dispersion in optical communications and other applications.
In modern double-clad fibers for high power fiber amplifiers and lasers, the inner cladding has a higher refractive index than the outer cladding.
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.
This course gives an introduction to Lasers by both considering fundamental principles and applications. Topics that are covered include the theory of lasers, laser resonators and laser dynamics.
In
The physics of optical communication components and their applications to communication systems will be covered. The course is intended to present the operation principles of contemporary optical comm
This course introduces the basic principles of lasers to then focus on the latest developments in ultrafast radiation sources, including X-ray and gamma-ray sources, attosecond pulses generation, free
Double-clad fiber (DCF) is a class of optical fiber with a structure consisting of three layers of optical material instead of the usual two. The inner-most layer is called the core. It is surrounded by the inner cladding, which is surrounded by the outer cladding. The three layers are made of materials with different refractive indices. There are two different kinds of double-clad fibers. The first was developed early in optical fiber history with the purpose of engineering the dispersion of optical fibers.
A dopant (also called a doping agent) is a trace of impurity element that is introduced into a chemical material to alter its original electrical or optical properties. The amount of dopant necessary to cause changes is typically very low. When doped into crystalline substances, the dopant's atoms get incorporated into its crystal lattice. The crystalline materials are frequently either crystals of a semiconductor such as silicon and germanium for use in solid-state electronics, or transparent crystals for use in the production of various laser types; however, in some cases of the latter, noncrystalline substances such as glass can also be doped with impurities.
En optique, on appelle amplificateur optique un dispositif qui amplifie un signal lumineux sans avoir besoin de le convertir d'abord en signal électrique avant de l'amplifier avec les techniques classiques de l'électronique. Un amplificateur à fibre dopée fonctionne à la manière d'un laser. Une portion de fibre optique est dopée et est pompée optiquement avec un laser afin de placer les ions de dopage dans un état excité.
Explore l'optique quantique d'une cavité, définissant l'entrée et les sorties, et couvre des sujets comme les modes de cavité et les équations quantiques de Langevin.