Publications associées à Ruban perforé

Punching strength of continuous flat slabs

Reinforced concrete slabs with uniform thickness are common in residential and commercial buildings but can also be found in other types of structures. Such slabs are susceptible to punching shear failures, where a supporting column penetrates through the ...

EPFL2016

Compressive Membrane Action Effects on Punching Strength of Flat RC Slabs

Aurelio Muttoni, Raffaele Cantone, Beatrice Belletti, Luca Manelli

The design of reinforced concrete flat slabs in practice can be governed at failure by punching shear close to concentrated loads or columns. Punching shear resistance formulations provided by codes are calibrated on the basis of experimental tests on isol ...

2016

The Critical Shear Crack Theory for punching design: from a mechanical model to closed-form design expressions

Aurelio Muttoni, Miguel Fernández Ruiz

The Critical Shear Crack Theory (CSCT) is a consistent approach used for shear design of one- and two-way slabs failing in shear and punching shear respectively. The theory is based on a mechanical model allowing to determine the amount of shear force that ...

2016

Influence of moment redistribution and compressive membrane action on punching strength of flat slabs

Aurelio Muttoni, Miguel Fernández Ruiz, Jürgen Einpaul

The punching shear strength of interior column connections of flat slabs has traditionally been investigated with isolated test specimens subjected exclusively to hogging bending moments. However, the behavior of such specimens is different from that of ac ...

Engineering structures2015

Effect of transverse load on the critical current of a coated conductor Roebel cable

Pierluigi Bruzzone, Davide Uglietti, Rainer Wesche

Roebel cables are one possible option for use in the manufacture of high current conductors for various technical applications. In this work the behaviour of critical current under transverse loads up to 90 MPa was studied in coated conductor Roebel cables ...

2013