Concept

Compresseur mécanique

Publications associées (145)

SMD pressure and flow sensors for industrial compressed air in LTCC technology

Peter Ryser, Thomas Maeder, Yannick Sébastien Fournier, Grégoire Boutinard Rouelle

In this work, we propose an SMD (surface mount device) pressure sensor in LTCC technology specially designed for standard industrial compressed air. It combines the measurement of pressure and temperature, with its integrated signal conditioning electronic ...

2009

Delamination of pultruded glass fiber-reinforced polymer composites subjected to axial compression

Thomas Keller, Yu Bai, Till Vallée

Axial compression experiments were conducted on pultruded E-glass fiber-reinforced polymer laminates of different slenderness. Second-order deformations greatly increased the bending moments and shear forces of slender specimens. Delamination failure occur ...

2009

Multi-axial mechanical properties of human trabecular bone

Liliana Rincon Kohli

In the context of osteoporosis, evaluation of bone fracture risk and improved design of epiphyseal bone implants rely on accurate knowledge of the mechanical properties of trabecular bone. A multi-axial loading chamber was designed, built and applied to ex ...

2009

Experimental investigation of a direct driven radial compressor for domestic heat pumps

Daniel Favrat, Jürg Alexander Schiffmann

The presence of oil in domestic heat pumps is an obstacle toward higher efﬁciency, particularly for enhanced surface evaporators and for advanced concepts based on two- stage cycles. Very compact direct driven radial compressors supported on oil-free beari ...

2009

EXPERIMENTAL INVESTIGATION OF FLOW INSTABILITIES AND ROTATING STALL IN A HIGH-ENERGY CENTRIFUGAL PUMP STAGE

François Avellan, Maher Kayal, Mohamed Farhat, Laurent Fabre, Stefan Berten, Philippe Dupont

In centrifugal pumps, the interaction between the rotating impeller and the stationary diffuser generates specific pressure fluctuation patterns. When the pump is operated at off design conditions, these pressure fluctuations increase. The resulting rise o ...

ASME2009

Integrated design, optimization and experimental investigation of a direct driven turbocompressor for domestic heat pumps

Jürg Alexander Schiffmann

Heating and cooling will more and more rely on heat pumping in order to enable a more rational use of energy. The further development of domestic and small industrial multi-stage heat pumps with enhanced performance is impaired by the presence of oil mixed ...

EPFL2008

Low power ORC-ORC systems for heat pump applications

Daniel Favrat, Jonathan Demierre

This paper presents a study of a residential (about 20kW) ORC-ORC (Organic Rankine Cycle) thermally driven heat pump. The system works with three different temperature levels similar to absorption heat pumps. The proposed concept is a hermetic system using ...

2008

Numerical and experimental investigation of the shock-vane interaction in a transonic compressor

Stefan Kristukat

A numerical and experimental investigation of the shock-IGV (inlet guide vane) interaction in a transonic compressor is conducted at the Laboratoire de Thermique Appliquée et de Turbomachines (LTT) at the Ecole Polytechnique Fédérale de Lausanne (EPFL). Th ...

EPFL2008

Multiaxial Yield Behaviour of Al Replicated Foam

Andreas Mortensen, Etienne Combaz

Two major classes of models for the multiaxial yield behaviour of aluminium foams are found in the literature. One is based on the foam properties and uses empirical constants determined by fitting of experimental data. The other is based on a mean-field a ...

2007

Fountain Codes for the Slepian-Wolf Problem

Mohammad Amin Shokrollahi, Bertrand Ndzana Ndzana

In this paper, we describe one solution to the two-user Slepian-Wolf problem in a certain part of the achievable region using fountain codes. Symmetric case of memoryless compression of two correlated sources is considered and modeled by a BSC channel. The ...

2006

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Connectez-vous pour utiliser Chat avec Graph Search