Concept
Moteur-fusée à ergols liquides
Personnes associées (14)
François Maréchal
Look at the
researcher id
Nico de Rooij
Nico de Rooij is Professor Emeritus of EPFL and previous Vice-President of CSEM SA. He was Professor of Microengineering at EPFL and Head of the Sensors, Actuators and Microsystems Laboratory (
SAMLAB
) from 2009 to 2016. At
CSEM SA
he was responsible for the EPFL CSEM coordination from 2012 to 2016. His research activities include the design, micro fabrication and application of miniaturized silicon based sensors, actuators, and microsystems. He authored and coauthored over 400 published
journal papers
in these areas.
He was Professor at the University of Neuchatel and Head of the Sensors, Actuators and Microsystems Laboratory (SAMLAB) from 1982 to 2008. Since October 1990 till October 1996 and again from October 2002 until June 2008, he has been the director of the Institute of Microtechnology of the University of Neuchatel (IMT UniNE). He lectured at the Swiss Federal Institute of Technology, Zurich (ETHZ), and since 1989, he has been a part-time professor at the Swiss Federal Institute of Technology, Lausanne (EPFL). He has been appointed Vice-President of the CSEM SA in February 2008 and headed the newly created Microsystems Technology Division of CSEM SA, from 2008 until 2012. He was Director of EPFL's Institute of Microengineering (EPFL STI IMT) from 2009 to 2012, following the transfer of IMT Uni-NE to EPFL.
Dr. de Rooij is a Fellow of the IEEE and Fellow of the Institute of Physics (UK). He recieved the IEEE
Jun-Ichi Nishizawa Gold Medal
, the Schlumberger Prize as well as the
MNE Fellow Award 2016
. He was awarded a Visiting Investigatorship Program (VIP) in MEMS/NEMS Systems by the
A*STAR Science and Engineering Council (SERC)
, Singapore, hosted by
SIMTech
, for the period 2005-2008.
Prof. de Rooij is Corresponding Member of the
Royal Netherlands Academy of Arts and Sciences
and Individual Member of the
Swiss Academy of Engineering Sciences
.
He has been serving on the Editorial Boards of the
IEEE/ASME Journal of Microelectromechanical Systems (IEEE JMEMS)
,
the IEEE proceedings
,
the Journal of Micromechanics and Microengineering, JM & M,
,
the Sensors and Actuators
,and
Sensors and Materials
. He was Member of the Information and Communication technology jury of the BBVA Foundation Frontiers of Knowledge Awards from 2009 to 2012.
Dr. de Rooij is (or was) Member of numerous international steering committees of conference series as well as
technical paper review panels including the steering committee of the International Conference on Solid-State
Sensors and Actuators and of Eurosensors. He acted as European Program Chairman of Transducers '87 and General Chairman of Transducers '89, Montreux, Switzerland.
He has supervised more than 70 Ph.D. students, who have successfully completed their
Ph.D. thesis.
He received his M.Sc. degree in physical chemistry from the State University of Utrecht, The Netherlands, in 1975, and a Ph.D. degree from Twente University of Technology, The Netherlands, in 1978. From 1978 to 1982, he worked at the Research and Development Department of Cordis Europa N.V., The Netherlands.
Daniel Favrat
Daniel Favrat a obtenu à l'EPFL son diplôme d'ingénieur mécanicien en 1972 et le titre de docteur ès sciences techniques en 1976.
Il passe ensuite 12 ans dans des centres de recherche industriels au Canada et en Suisse.Depuis 1988, D. Favrat est professeur et directeur du Laboratoire d'énergétique industrielle à l'EPFL. Il est aussi successivement directeur de l'Institut des Sciences de l'énergie et, dès janvier 2007, de l'Institut de Génie Mécanique. Ses recherches portent sur les analyses systémiques prenant en compte l'énergétique, l'environnement et l'économie (optimisation environomique), et les systèmes avancés pour une utilisation plus rationnelle de l'énergie (pompes à chaleur, moteurs, piles à combustible,turbomachines etc.)
Il est membre de l'Académie Suisse des Sciences Techniques et vice-président du comité énergie de la Fédération Mondiale des Organisations d'Ingénieurs. Il est éditeur associé du journal "Energy" et l'auteur de deux livres sur la thermodynamique et l'énergétique publiés aux Presses Polytechniques Universitaires Romandes.
François Gallaire
Né le 26 février 1975, François Gallaire obtient, en 1998, le diplôme dingénieur de lEcole Polytechnique à Paris et, en 1999, un master en « Physique des liquides » à lUniversité Pierre et Marie Curie, toujours à Paris. Il rejoint ensuite le Laboratoire dhydrodynamique (LadHyX) à lEcole polytechnique où il soutient, en 2003, une thèse sur le thème des instabilités des jets tournants et sur le contrôle de léclatement tourbillonnaire sous la direction de Jean-Marrc Chomaz. En 2003, il est nommé chargé de recherche au CNRS au Laboratoire J.A. Dieudonné de lUniversité de Nice Sophia-Antipolis.En 2009, il rejoint l'EPFL pour y fonder le laboratoire des mécanique des fluides et instabilités (LFMI). Ses recherches se concentrent sur létude des propriétés fondamentales de stabilité des écoulements de fluides et sont guidées par les applications réelles, en particulier le contrôle des écoulements. Récemment, il a réalisé dimportantes contributions dans les domaines de la micro-fluidique (lanalyse de la manipulation par laser dune goutte dans un micro-canal) et la dynamique des bio-fluides (le descriptif mécanique de lanévrisme de laorte abdominale).
John Richard Thome
John R. Thome is Professor of Heat and Mass Transfer at the Swiss Federal Institute of Technology in Lausanne (EPFL), Switzerland since 1998, where his primary interests of research are two-phase flow and heat transfer, covering both macro-scale and micro-scale heat transfer and enhanced heat transfer. He directs the Laboratory of Heat and Mass Transfer (LTCM) at the EPFL with a research staff of about 18-20 and is also Director of the Doctoral School in Energy. He received his Ph.D. at Oxford University, England in 1978. He is the author of four books: Enhanced Boiling Heat Transfer (1990), Convective Boiling and Condensation, 3rd Edition (1994), Wolverine Engineering Databook III (2004) and Nucleate Boiling on Micro-Structured Surfaces (2008). He received the ASME Heat Transfer Division's Best Paper Award in 1998 for a 3-part paper on two-phase flow and flow boiling heat transfer published in the Journal of Heat Transfer. He has received the J&E Hall Gold Medal from the U.K. Institute of Refrigeration in February, 2008 for his extensive research contributions on refrigeration heat transfer and more recently the 2010 ASME Heat Transfer Memorial Award. He has published widely on the fundamental aspects of microscale and macroscale two-phase flow and heat transfer and on enhanced boiling and condensation heat transfer.
Mohamed Farhat
M. Farhat was born in Casablanca in 1962 (Moroccan citizen). He graduated at Ecole Nationale Supérieure d'Hydraulique et de Mécanique de Grenoble (France. He joined The LMH laboratory in 1986 as research assistant. He completed in 1994 a Ph.D. thesis on Cavitation. He joined the R&D department of Hydro-Quebec in Montréal (Canada) in 1995 where he was in charge of several research projects in the areas of production and transportation of hydropower and mainly the monitoring of large hydro turbines. Since 2001, he is senior scientist at the LMH laboratory, head of the cavitation group. He is also lecturer in Master and Doctoral programs. He is member of the Doctoral Committee in Mechanics.
David Atienza Alonso
David Atienza Alonso is an associate professor of EE and director of the Embedded Systems Laboratory (ESL) at EPFL, Switzerland. He received his MSc and PhD degrees in computer science and engineering from UCM, Spain, and IMEC, Belgium, in 2001 and 2005, respectively. His research interests include system-level design methodologies for multi-processor system-on-chip (MPSoC) servers and edge AI architectures. Dr. Atienza has co-authored more than 350 papers, one book, and 12 patents in these previous areas. He has also received several recognitions and award, among them, the ICCAD 10-Year Retrospective Most Influential Paper Award in 2020, Design Automation Conference (DAC) Under-40 Innovators Award in 2018, the IEEE TCCPS Mid-Career Award in 2018, an ERC Consolidator Grant in 2016, the IEEE CEDA Early Career Award in 2013, the ACM SIGDA Outstanding New Faculty Award in 2012, and a Faculty Award from Sun Labs at Oracle in 2011. He has also earned two best paper awards at the VLSI-SoC 2009 and CST-HPCS 2012 conference, and five best paper award nominations at the DAC 2013, DATE 2013, WEHA-HPCS 2010, ICCAD 2006, and DAC 2004 conferences. He serves or has served as associate editor of IEEE Trans. on Computers (TC), IEEE Design & Test of Computers (D&T), IEEE Trans. on CAD (T-CAD), IEEE Transactions on Sustainable Computing (T-SUSC), and Elsevier Integration. He was the Technical Program Chair of DATE 2015 and General Chair of DATE 2017. He served as President of IEEE CEDA in the period 2018-2019 and was GOLD member of the Board of Governors of IEEE CASS from 2010 to 2012. He is a Distinguished Member of ACM and an IEEE Fellow.
Jan Sickmann Hesthaven
Prof. Hesthaven received an M.Sc. in computational physics from the Technical University of Denmark (DTU) in August 1991. During the studies, the last 6 months of 1989 was spend at JET, the european fusion laboratory in Culham, UK. Following graduation, he was awarded a 3 year fellowship to begin work towards a Ph.D. at Riso National Laboratory in the Department of Optics and Fluid Dynamics. During the 3 years of study, the academic year of 1993-1994 was spend in the Division of Applied Mathematics at Brown University and three 3 months during the summer of 1994 in Department of Mathematics and Statistics at University of New Mexico. In August 1995, he recieved a Ph.D. in Numerical Analysis from the Institute of Mathematical Modelling (DTU). Following graduation in August 1995, he was awarded an NSF Postdoctoral Fellowship in Advanced Scientific Computing and was approinted Visiting Assistant Professor in the Division of Applied Mathematics at Brown University. In December of 1996, he was appointed consultant to the Institute of Computer Applications in Science and Engineering(ICASE) at NASA Langley Research Center (NASA LaRC). As of July 1999, he was appointed Assistant Professor of Applied Mathematics, in September 2000 he was awarded an Alfred P. Sloan Fellowship, as of July 2001 he was awarded a Manning Assistant Professorship, and in March 2002, he was awarded an NSF Career Award. In January 2003, he was promoted to Associate Professor of Applied Mathematics with tenure and in May 2004 he was awarded Philip J. Bray Award for Excellence in Teaching in the Sciences (the highest award given for teaching excellence in all sciences at Brown University). He was promoted to Professor of Applied Mathematics as of July 2005. From October 2006 to June 2013, he was the Founding Director of the Center for Computation and Visualization (CCV) at Brown University. As of October 2007, he holds the (honorary) title of Professor (Adjunct) at the Technical University of Denmark. In November 2009, he successfully defended his dr.techn thesis at the Technical University of Denmark and was rewarded the degree of Doctor Technices -- the highest academic distinction awarded based on ... substantial and lasting contributions that has helped to move the research area forward and penetrated into applications. As grant Co-PI he served from Aug 2010 to June 2013 as Deputy Director of the Institute of Computational and Experimental Research in Mathematics (ICERM), the newest NSF Mathematical Sciences Research Institute. After having spend his entire academic career at Brown University, Prof Hesthaven decided to pursue new challenges and joined the Mathematics Institute of Computational Science and Engineering (MATHICSE) at Ecole Polytechnique Fédérale de Lausanne (EPFL) in Switzerland in July 2013. In March 2014 he was elected SIAM Fellow for contributions to high-order methods for partial differential equations.
Jürg Alexander Schiffmann
After obtaining his diploma in mechanical engineering from EPFL in 1999 he co-founded a start-up company dedicated to the design of gas bearing supported rotors. In 2005 he joined Fischer Engineering Solutions where he led the development of small-scale, gas bearing supported high-speed turbomachinery for fuel cell air supplies and for domestic scale heat pumps. In parallel he worked on his PhD, which he obtained from EPFL in 2008 and for which he was awarded the SwissElectric Research Award. He then joined the Gas Turbine Lab at MIT as a postdoctoral associate where he worked on foil bearings and on the experimental investigation of radial diffusers. In 2013 he was nominated assistant professor at the Ecole Polytechnique Fédérale de Lausanne where he founds the Laboratory for Applied Mechanical Design. His current research interest are in gas lubricated bearings, in aerodynamics of small-scale compressors and turbines and in automated design and optimization methodologies.