Êtes-vous un étudiant de l'EPFL à la recherche d'un projet de semestre?
Travaillez avec nous sur des projets en science des données et en visualisation, et déployez votre projet sous forme d'application sur GraphSearch.
Concept
Static load testing
Résumé
Static load testing is an in situ type of load testing used in geotechnical investigation to determine the bearing capacity of deep foundations prior to the construction of a building. It differs from the statnamic load test and dynamic load testing in that the pressure applied to the pile is slower. Static load testings are performed in order to measure a design's axial tension or axial compression. It can also be used to measure its deflected shape under lateral load
Kentledge refers to iron weights used as permanent ship ballast, or iron or concrete weights used in load testing. This method involves the construction of a platform upon which massive weights are placed. These weights bear down on the pile putting it under load. Gauges measure resistance, movement of the pile, and other readings to determine the properties of the ground.
Bi-directional Static Load Test is a steadfast Maintained Load Test option for both large and small diameter piles that is widely used in the market. The main difference between a top-loaded maintained load test and a Bi-Directional is the location of the jack. One of the types of bi-directional method is YJACK method.
A sacrificial and embedded hydraulic jack is cast within the pile body. Upon application of load, the pile is separated into two sections and load is applied to both sections simultaneously and reacting against each other in two directions; upward against upper skin friction and downward against base end bearing and lower skin friction. Practically, the bi-directional pile load test does not require reaction beams, anchor piles or Kentledge during load applying. However, technically bi-directional is equivalent to static load test method. In other words, bi-directional simulates the static load test results.
Practically, the bi-directional pile load test does not require reaction beams, anchor piles or Kentledge during load applying. However, technically bi-directional is equivalent to static load test method. In other words, bi-directional simulates the static load test results.
Source officielle
À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.