Publications associées à Document technique unifié

Teaching Not To

Two design studios were successively taught in two schools of architecture: one at the Harvard Graduate School of Design (GSD) and the other at the Swiss Federal Institute of Technology in Lausanne (EPFL) in Lausanne, Switzerland, based on "A Global Morato ...

Taylor & Francis Inc2024

The Effect of Rivers on Energy Balance at the Neighborhood Scale. A comparative analysis of four Rhodanian sites in France and Switzerland

Sergi Aguacil Moreno, Martine Laprise, Sara Sonia Formery Regazzoni, Emmanuel Rey

This research aims to compare the greenhouse gas (GHG) emissions of new neighbourhood projects near the Rhône River in France and Switzerland. The study considers the influence of the river on energy demand and resilience to climate change of 12 project-ba ...

Wrocław University of Science and Technology Publishing House2024

Building structures made of reused cut reinforced concrete slabs and walls: A case study

Corentin Jean Dominique Fivet, Maléna Bastien Masse, Nicole Widmer

Reuse of reinforced concrete (RC) components reduces construction’s environmental impacts and waste. Rather than crushing the concrete of an obsolete structure, its components are saw cut and later reassembled in a new structure. The theoretical feasibilit ...

CRC Press2023

DIET Controller: Dynamic Indoor Environment using Deep Reinforcement Learning

Arnab Chatterjee

Heating, Ventilation, and Air Conditioning (HVAC) Systems utilize much energy, accounting for 40% of total building energy use. The temperatures in buildings are commonly held within narrow limits, leading to higher energy use. Measurements from office bui ...

EPFL2023

Preserving suspended structures with light façades (1960-1980). Architectural study and retrofitting proposals

Giuseppe Galbiati

Nowadays, the energy efficiency of the existing building stock is internationally accepted as a topical issue. Energy retrofitting is encouraged, improving the thermal performances of buildings, but often altering the historical image of our cities. Attent ...

EPFL2023

Autodigit-RAD: Towards an automation of the radon’s concentration dataflow in a new and innovative building

Sergi Aguacil Moreno, Sebastian Duque Mahecha

Radon is a noble, natural, and radioactive gas coming mainly from the ground which might accumulate indoors and lead each year to 200-300 deaths from lung cancer in Switzerland. A brand new and innovative living lab will be built as of 2023 in Fribourg (Sw ...

2023

Could building replacements significantly contribute to seismic vulnerability mitigation at urban scale? Case studies of two typical swiss cities

Pierino Lestuzzi

This paper contains an investigation on the potential decrease of seismic vulnerability related to building replacements for the cities of Sion and Martigny in Switzerland. Those two cities were identified for the present research based on the accuracy of ...

FRONTIERS MEDIA SA2022

Les Cahiers de l'Ibois 3 / Ibois Notebook 3

Petras Vestartas, Sandra Vuilleumier

Before the twentieth century and concrete modernity, it was stone that embodied the “well built”. Could sustainable wood one day replace concrete as the archetypal material? Will it find a place on the scale of values that gives archi- tecture its referenc ...

EPFL PRESS2022

Fire performance evaluation of GFRP-balsa sandwich bridge decks

Niloufar Vahedi

Bridges are a critical component of national infrastructures and economies. A significant percentage of bridges built all around the world are made of reinforced concrete which according to building codes have a life span between 80-100 years. However, str ...

EPFL2022

Digital twins for post-earthquake damage assessment of free-standing buildings including damage information

Katrin Beyer, Radhakrishna Achanta, Bryan German Pantoja Rosero, Amir Rezaie

We present a pipeline for the automatic generation of digital twins of free-standing buildings for damage assessment. Our method takes multiple view images of the target building as input and processes them to produce a 3D model in levels of detail (LOD) f ...

2022