Catalyse | EPFL Graph Search

Êtes-vous un étudiant de l'EPFL à la recherche d'un projet de semestre?

Travaillez avec nous sur des projets en science des données et en visualisation, et déployez votre projet sous forme d'application sur GraphSearch.

Découvrez-en plus sur les applications Graph.

vignette|Intérieur du musée de la catalyse à Widnes en Angleterre. En chimie, la catalyse (du grec ancien : , « détacher ») se réfère à l'accélération ou la réorientation de la cinétique de réaction au moyen d'un catalyseur, et dans certains cas à la sélectivité pour diriger la réaction dans un sens privilégié (réaction concurrente, production d'un produit plutôt qu'un autre). Le catalyseur est utilisé en quantité beaucoup plus faible que les produits réactifs. Il n'apparait pas en général dans le bilan de réaction, donc pas dans son équation globale. Cependant les molécules du catalyseur participent à la réaction dans une étape, ce qui explique leur influence sur la vitesse de réaction, et ensuite elles sont régénérées dans une étape subséquente. Le catalyseur reste parfois infimement mélangé au produit final. La catalyse joue un rôle dans de très nombreux domaines. Depuis plus de cent ans, elle a des applications dans le domaine du chauffage (exemple : la lampe Berger) : des combu

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Publications associées

Chargement

Personnes associées

Chargement

Unités associées

Chargement

Concepts associés

Chargement

Cours associés

Chargement

Séances de cours associées

Chargement

Résumé

Source officielle

À propos de ce résultat

Publications associées (100)

Publications associées

Chargement

Personnes associées (234)

Personnes associées

Chargement

Unités associées (70)

Unités associées

Chargement

Concepts associés (318)

Concepts associés

Chargement

Cours associés (107)

Cours associés

Chargement

Séances de cours associées (264)

Séances de cours associées

Chargement

Molecular Engineering of Electrode Surfaces for Electrocatalysis

Patrick Eduard Alexa

Electrocatalysts play an important part on the route towards environmental friendly energy sources. They support modern technologies like fuel cells to move further away from the utilization of fossil fuels and the resulting CO2 emission into our atmosphere. The main principle of such energy conversion technologies is to store chemical energy within chemical bonds and to release it as electric energy to fulfill the energy demand of today's society. However energy conversion chemistry in such technologies requires catalysts in order to be effective by providing an alternative reaction pathway that lowers activation energies and maximizes the energy output. Providing suitable catalyst surfaces requires a fundamental knowledge of the interaction of reactants and reaction intermediates with the catalyst surfaces. This concern is addressed in this thesis by fabricating specifically tailored molecular components on metal surfaces, which act as organic/inorganic hybrid electrodes for various energy conversion reactions in electrocatalysis. Characterizing the electrode surface is crucial in order to identify active sites of the catalyst. The molecular structure is investigated by surface sensitive techniques, such as STM and XPS in combination with a home-build transfer system, which enables electrode fabrication in UHV and electrocatalytic experiments in a liquid environment. A detailed characterization of organic polymer components on electrode surfaces is obtained by combining experimental data with MD simulations. The morphology of polymer networks can be successfully mimicked and depending on the chemical composition and the structure, spatial correlations on short length scales are reported. Hybrid electrodes with organic polymer co-catalysts reveal an increased catalytic activity for the HER by providing suitable docking sites that act as catalytic active sites. Reactants and reaction intermediates are stabilized via hydrogen bonding, which results in a higher catalytic turnover. The specific designed structure of the organic co-catalyst helps to identify a fraction of the reaction mechanism and highlights the importance of molecular components in electrocatalysis. The utilization of organic units on electrocatalysts provides also an excellent opportunity in order to use single metal atoms as catalysts. Engineering large pi-systems has no significant impact on the ORR activity, while the distance between active sites and the underlying electrode are crucial for enhancing the catalytic activity. A significant factor in using molecular components in electrocatalysis is the stability of the organics. Using electrografting allows to design organic/inorganic hybrid electrodes with covalent bonds between the molecular component and the metal substrate. Attaching empty porphyrin molecules to substrates introduces a powerful technique in molecular engineering, since empty porphyrin cycles can be metallized with various metal centers that can act as electrocatalysts for different electrochemical reactions. In summary, this thesis provides multiple engineering aspects, which are useful in designing molecular components on metal electrodes for energy conversion. Such hybrid catalyst surfaces are capable of improving the catalytic activity and allow to study the mechanism of catalytic reactions. Implementing organic components provides new routes for tailoring novel materials, which deliver new insight into the complex field of electrocatalysis.

EPFL2020

Chargement

Etude de la promotion électrochimique de l'oxydation catalytique de l'éthylène sur des oxydes métalliques

The electrochemical promotion of heterogeneous catalytic reactions is a new development which draws the attention of the scientific community as much to fundamental research as to the possible direct applications of this phenomenon in automotive and in industrial catalysis. We have chosen to study the electrochemical promotion of the complete ethylene oxidation on metallic oxides catalysts. The principal oxides which we used has been the iridium oxide (IrO2) and iridium and titanium oxide mixtures (IrO2+TiO2), deposited on yttria-stabilized zirconia (YSZ). We have proved that the electrochemical promotion of ethylene combustion can be applied to these catalysts. Contrary to what was established before, we have demonstrated a certain persistence of activation of the reaction. mainly on the iridium oxide, after the end of polarization. The persistent reaction rate enhancement ratio is a function of the passed electric charge and levels off at a value of approximately 3. The other experimental significant fact for heterogeneous catalysis which has been discovered is the relation between chemical promotion and electrochemical promotion. Applying electrochemical promotion to a IrO2 + TiO2 composite catalyst, the two kinds of promotions have been confronted, since a IrO2 + TiO2 composite catalyst presents a chemical promotion, more precisely a synergy between the two components of the catalyst. The maximal amplitude of the electrochemical promotion of such catalysts has been demonstrated to be strongly reduced in comparison with the one of pure catalysts. As the maximal enhancement factor of the catalytic reaction rate was 12 for pure iridium oxide catalyst, the same factor dropped to less than 2 for a IrO2 + TiO2 composite catalyst. This result has enabled us to affirm that the mechanisms of chemical promotion and electrochemical promotion should involve a common type of surface activating species : a mobile surface spillover oxygen species. The catalyst work function on-line measurement with a Kelvin probe has enabled us to link the reaction rate with the work function change and to link the applied potential with the work function change, for al1 the phases of a transient polarisation experiment. The persistent activation of the catalyst after the end of a polarization has been linked to a persistent change in the work function. A major trend of this research consists in cyclic voltammetry. It is certainly one of the most powerful medium to extract experimental facts which have been useful to understand the electrochemical promotion principles. Due to the small amplitude of the potential which has been used in cyclic voltammetric experiments, the electrolyte-catalyst interface wasn't practically affected by these in situ measurements. By analogy to voltammetric charge formation mechanism in aqueous electrochemistry, we have taken the following chemical capacitance as responsible for the voltammetric charge in our system: IrO2 + δO- ⇄ IrO2+δ + δe- According to this mechanism, the reaction between O- and IrO2 can only occur at the interface between solid electrolyte and catalyst, where contact between the two species exists. In Our system, voltammetric charge has been demonstrated to be proportional to the thickness of the catalyst, proving by this way that the whole surface of the catalyst is in contact with the O- activating species coming from the solid electrolyte. So the implication of a spillover oxygen species during electrochemical promotion has been demonstrated by the way of cyclic voltammetry. The existence of this spillover oxygen species has been also directly proved by thermal desorption experiments under electrochemical promotion conditions. By considering the strong change in the decomposition temperature of the oxide induced by its polarisation, the thermal desorption technique has been used to display the influence of the polarization on the structure of the oxide catalyst itself.

EPFL1999

Chargement

Operando XAS insight in the redox dynamics of VOx species and reducible supports involved in oxidative dehydrogenation of alcohols

Anna Zabilska

Supported vanadia (VOx) belongs to some of the most versatile selective oxidation and reduction catalysts applied for many reactions in the chemical industry and pollution control. Among them, the oxidative dehydrogenation (ODH) of alcohols is particularly attractive since it is one of the main industrial methods of formaldehyde production and a possible route for the transformation of renewable bioethanol to value-added products, such as acetaldehyde and acetic acid. Despite many spectroscopic methods used to investigate the mechanism of this reaction, the details about the redox involvement of VOx species and promoting supports (CeO2 and TiO2) remain debated. In this study, we used an element-specific operando X-ray absorption spectroscopy (XAS) to probe the redox transformations of active sites in vanadia-titania and vanadia-ceria catalysts during ethanol and methanol ODH. By carefully designing the steady-state and transient operando XAS experiments and by applying advanced chemometric methods, we could discriminate specifically and often quantitatively, which role plays each redox couple during the alcohol ODH cycle and uncover hidden structure activity-relationships.Chapter 1 introduces the relevant literature and summarizes the goals and the scope of the thesis.In Chapter 2, we investigate the redox dynamics of active sites in a bilayered VOx/TiOx/SiO2 catalyst (an analog of a widely used VOx/TiO2 catalyst with comparable activity) during ODH of ethanol. Operando time-resolved V and Ti K-edge XAS coupled with a transient experimental strategy quantitatively showed that the formation of acetaldehyde over VOx/TiOx/SiO2 catalyst is kinetically coupled to the formation of a V4+ intermediate, while the formation of V3+ is delayed and its rate is 10-70 times lower. The only very weak redox activity of the Ti4+/Ti3+ couple was detected, which suggests that TiOx species promote the redox activity of VOx indirectly, either via the fast electron transport between VOx species or by changing the electronic structure of VOx species.In Chapter 3, we report on possible difficulties, which can occur during in situ XAS studies of supported vanadia (VOx) catalysts at synchrotron beamlines related to X-ray-induced photochemical reduction of vanadium. We rigorously tested this phenomenon and suggest approaches, which can help to identify and mitigate vanadium photoreduction interfering chemical speciation.In Chapter 4, we focused on the structure-activity relationships in VOx/CeO2 system. We prepared a series of VOx/CeO2 catalysts using high-surface-area CeO2 Using time-resolved operando quick XAS at V K- and Ce L3-edges, we demonstrated that during oxygen cut-off experiments vanadium and cerium change their oxidation states in concert with each other and with the production of acetaldehyde. It suggests that both reducible vanadium and cerium are parts of the same active sites. The maximum VOx/CeO2 activity per mass of catalyst observed at ca. 3 V/nm2 coincides with the maximal amount of cerium atoms, which reversibly change their oxidation state during oxygen cut-off experiments.In Chapter 5, we prove that the mechanistic findings described in Chapter 4 for ethanol ODH over VOx/CeO2 catalysts are also valid for methanol ODH. Moreover, we confirm that the VOx surface density is the main descriptor of the activity for VOx/CeO2 catalysts in alcohol ODH.

EPFL2022

Chargement

Oxygène

L'oxygène est l'élément chimique de numéro atomique 8, de symbole O. C'est la tête de file du groupe des chalcogènes, souvent appelé groupe de l'oxygène. Découvert indépendamment en 1772 par le Suéd

Enzyme

redresse=1.5|vignette| Représentation d'une α-glucosidase () avec à sa droite le substrat au-dessus des produits de réaction . redresse=1.5|vignette|Diagramme d'une réaction catalysée montrant l'éner

Hydrogène

Lhydrogène est l'élément chimique de numéro atomique 1, de symbole H. L'hydrogène présent sur Terre est presque entièrement constitué de l'isotope H (ou protium, comportant un proton et zéro neutron

ChE-403: Heterogenous reaction engineering

The theoretical background and practical aspects of heterogeneous reactions including the basic knowledge of heterogeneous catalysis are introduced. The fundamentals are given to allow for the use of chemical reactors to study reaction kinetics and test various mechanistic assumptions.

CH-421: Catalysis for energy storage

This course covers the fundamental and applied aspects of electrocatalysis related to renewable energy conversion and storage. The focus is on catalysis for hydrogen evolution, oxygen evolution, and CO2 reduction reactions. Both homogeneous and heterogeneous catalysts are discussed.

CH-422: Catalyst design for synthesis

This course on homogeneous catalysis provide a detailed understanding of how these catalysts work at a mechanistic level and give examples of catalyst design for important reactions (hydrogenation, olefin metathesis, cross-coupling).