Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
High head pressure tunnels and shafts of hydropower plants with low rock overburden have to be steel-lined. Since the water can reach in an uncontrolled way the rock surface in case of failure of these water-conveying systems, high damages due to landslide ...
The biomedical industry has an increasing demand for dissimilar metal joining processes, which are used for complex configuration designs, such as guidewires and other intravascular interventional devices. Their production becomes more and more challenging ...
We present results of a hybrid experimental and theoretical investigation of the fracture scaling in scratch tests and show that scratching is a fracture dominated process. Validated for paraffin wax, cement paste, Jurassic limestone and steel, we derive a ...
Soare and Curtin (Acta Mater. 2008; 56:4091-4101, 4046-4061) have recently developed a model of dynamic strain aging in solute-strengthened alloys. Their constitutive law describes time-dependent solute strengthening using rate equations that can be calibr ...
Focused Electron Beam Induced Processing (FEBIP) is a technique used for etching and deposition of micro- and nano-structures using a focused electron beam. FEBIP is commonly carried out in a Scanning Electron Microscope (SEM) with a Gas Injection System ( ...
We report on measurements of the stiffness and breaking strength of monolayer MoS2, a new semiconducting analogue of graphene. Single and bilayer MoS2 is exfoliated from bulk and transferred to a substrate containing an array of microfabricated circular ho ...
An argon gas atomized, pre-alloyed Fe-14Cr-2W-0.3Ti (wt.%) reduced activation ferritic (RAF) steel powder was mechanically alloyed with 0.3wt.% Y2O3 nano-particles in an attritor ball mill and consolidated by hot isostatic pressing at 1150 °C under a press ...
The microstructure and mechanical properties of hot rolled Fe-40 at-%Al based intermetallic alloys, with 0.1 at-%Zr and different additions of B (varying from 0.01 to 0.1 at-%), are characterised. The additions of Zr and B improve tensile properties at roo ...
K41X is a ferritic stainless steel grade which was successfully developed in exhaust gas manifold where the temperature could reach 950°C. It contains about 18% wt of chromium and it is stabilized with both titanium and niobium to warranty a good weldabili ...
A new, more physically realistic and practically useful model is presented for the simulation of high temperature austenite flow curves. It is an extension of our earlier empirical model based on the Avrami kinetics of dynamic recrystallization. In the new ...
