Induction électromagnétique

Science de la nature
Physique
Électromagnétisme
Circuit électrique

Publications associées (28)

À propos
Confidentialité
Mentions légales

Graph Chatbot

Preliminary Study of Pressure Self-Sensing Miniature Magnetorheological Valves

Yves Perriard, Yoan René Cyrille Civet, Christian Köchli, Sofia Lydia Ntella, Kenny Jeanmonod, Minh Trung Duöng

Magnetorheological (MR) valves have been included in many innovative engineering systems, such as dampers, clutches, or brakes, with different fields of application. Their role serves actuation purposes, while integrated displacement and velocity sensing i ...

IEEE2021

A New Cabled Stabilizer for the Nb3Sn React&Wind DEMO Conductor Prototype

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Mithlesh Kumar, Vincenzo D'Auria

A Nb3Sn based, React&Wind flat cable, named RW2, was developed in the past three years at the Swiss Plasma Center in the scope of the EUROfusion conceptual studies for DEMO. The test results presented earlier proved an excellent DC performance, but large e ...

IEEE Institute of Electrical and Electronics Engineers2021

A New Cabled Stabilizer for the Nb3Sn React&Wind DEMO Conductor Prototype

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Mithlesh Kumar, Vincenzo D'Auria

2021

Designing compliant mechanisms composed of shape memory alloy and actuated by induction heating

Yves Perriard, Paolo Germano, Thomas Guillaume Martinez, Adrien Jean-Michel Thabuis, Sean Thomas

Shape Memory Alloys (SMAs) are a type of smart materials that reacts mechanically to heat. Due to their complex behavior, they are often used in a simple geometry such as wires. This constrains the output displacement of the alloy to a simple linear contra ...

2021

Improved properties of soft magnetic composites with hollow microstructures

Yves Perriard, Xiaotao Ren

Soft Magnetic Composites (SMCs) possess promising electromagnetic characteristics and attract intense research and application interest in the engineering community. Fabrication of composites with customized architecture is feasible due to the recent advan ...

2021

Shape Optimization of Soft Magnetic Composites using Level-set Method

Yves Perriard, Adrien Jean-Michel Thabuis, Xiaotao Ren

Institute of Electrical and Electronics Engineers2021

Ultralow-Profile Circularly Polarized Reflectarray Antenna for CubeSat Intersatellite Links in K-B and

Anja Skrivervik, Miroslav Veljovic

An ultralow-profile circularly polarized (CP) reflectarray (RA) antenna is presented in this article, based on the variable-rotation technique for beam collimation and scanning. Starting from a conventional split-loop element, a new wideband element is des ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Impact of Frequency-Dependent Soil Models on Grounding System Performance for Direct and Indirect Lightning Strikes

Farhad Rachidi-Haeri

The goal of this article is to investigate the effect of frequency-dependent soil models on the performance of grounding electrodes subjected to lightning strikes. Several soil models are examined while accounting for the variation of soil resistivity and ...

2021

Scoping the characteristics and benefits of a connected double-null configuration for power exhaust in EU-DEMO

Holger Reimerdes, Marco Wischmeier, Mirko Wensing

A double-null configuration is being considered for the EU-DEMO, due to its potential benefits for power exhaust arising from the use of two active divertors and magnetically disconnected low- and high-field sides. Using systematic parameter scans in fluid ...

Elsevier2021

Nonlinear plasmonics with monocrystalline gold

Sergejs Boroviks

Plasmonic nanostructures allow to controllably enhance linear and nonlinear light-matter interactions by concentrating the electromagnetic fields at the scales below the diffraction limit. This feature is highly desired for many applications, e.g. bio- and ...

2021

Page 2 sur 3