Concept

Abrasion (géologie)

Abrasion is a process of erosion which occurs when material being transported wears away at a surface over time. It is the process of friction caused by scuffing, scratching, wearing down, marring, and rubbing away of materials. The intensity of abrasion depends on the hardness, concentration, velocity and mass of the moving particles. Abrasion generally occurs in four ways: glaciation slowly grinds rocks picked up by ice against rock surfaces; solid objects transported in river channels make abrasive surface contact with the bed and walls; objects transported in waves breaking on coastlines; and by wind transporting sand or small stones against surface rocks. Abrasion, under its strictest definition, is commonly confused with attrition and sometimes hydraulic action however, the latter less commonly so. Both abrasion and attrition refers to the wearing down of an object. Abrasion occurs as a result of two surfaces rubbing against each other, resulting in the wearing down of one or both of the surfaces. However, attrition refers to the breaking off of particles (erosion) which occurs as a result of objects hitting against each other. Abrasion leads to surface-level destruction over a period of time, whereas attrition results in more change at a faster rate. Today, the geomorphology community uses the term "abrasion" in a looser way, often interchangeably with the term "wear". Abrasion in a stream or river channel occurs when the sediment carried by a river scours the bed and banks, contributing significantly to erosion. In addition to chemical and physical weathering of hydraulic action, freeze-thaw cycles, and more, there is a suite of processes which have long been considered to contribute significantly to bedrock channel erosion include plucking, abrasion (due to both bedload and suspended load), solution, and cavitation. In terms of a glacier, it is a similar principal; the moving of rocks over a surface wears it away with friction, digging a channel that, when the glacier moves away, is called a U-shaped valley.

À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.
Cours associés (4)
CIVIL-427: Flow monitoring technology in water engineering
This course aims to provide theoretical fundamentals in flow measurement science, and advanced knowledge regarding measurement methods, tools and instrumentation applied to experimental hydraulics, in
ME-462: Cavitation and interface phenomena
Introduction, concepts de base; implosion d'une bulle de cavitation; dynamique des cavits attachées; cavitation dans les structures tourbillonnaires; applications industrielles.
CIVIL-410: Fluvial hydraulics and river training works
Le cours donne aux étudiants des solides connaissances théoriques en hydraulique fluviale, et enseigne les bases de l'ingénierie fluviale dans le but de concilier la protection contre les crues et la
Afficher plus
Séances de cours associées (9)
Hydraulique fluviale et développement
Explore le transport des sédiments, les structures fluviales et les plates-formes hydrauliques pour le développement des rivières.
Hydraulique fluviale et transport de lits : Plateforme De Cesare
Explore l'hydraulique fluviale, le transport de la charge de lit et les plates-formes de construction hydraulique, en mettant l'accent sur les défis de la prévision du mouvement des sédiments dans les rivières et l'impact des inondations sur les infrastructures.
Canaux et galeries : Installations hydrauliques et ondes translationnelles
Explore les constructions hydrauliques, la propagation des vagues et l'analyse de la charge de lit pour la conception du projet.
Afficher plus
Publications associées (83)

Stochastic Simulations and Machine Learning Modeling to Predict Bedload Transport and Bed Topography

Mehrdad Kiani Oshtorjani

In computational hydraulics models, predicting bed topography and bedload transport with sufficient accuracy remains a significant challenge. An accurate assessment of a river's sediment transport rate necessitates a prior understanding of its bed topograp ...
EPFL2024

Stochastic Modeling of Bedload Transport and Bar Development in Shallow Flow: Linear Stability Analysis and Numerical Simulation

Mehrdad Kiani Oshtorjani

Field surveys and laboratory experiments show that bedload transport rates may vary to within one order of magnitude for a given water discharge. One of today's major challenges is to account for these large transport rate fluctuations in computational hyd ...
2023

Scaling behavior of bedload transport: what if Bagnold was right?

Christophe Ancey

There is a paradox in the relationship between bedload transport rates and flow variables: laboratory and field studies have reported on how bedload transport rates depend on flow variables through a power law, but none of the empirical laws fitted to the ...
2023
Afficher plus
Concepts associés (15)
Élévation du niveau de la mer
L' est un phénomène observable au niveau mondial depuis le début du , qui résulte du réchauffement climatique. Le niveau moyen des océans augmente de entre 1901 et 2018, la moitié de cette hausse étant observée après 1980. Le rythme annuel, en 2020, est estimé à plus de par an. Les mesures sont effectuées principalement par deux moyens : les marégraphes, installations fixes à terre, et l'altimétrie satellitaire. Le niveau des océans est lié au climat et plus précisément à la température moyenne à la surface de la Terre.
Excavation glaciaire
Une excavation glaciaire est une conformation concave du sol abritant une partie d'un glacier. Elle se forme depuis une fracture préexistante du substrat rocheux et joue un rôle important dans son extension et la formation de nouvelles fractures d'où ne sont issus que de minimes fragments de matière, déplacés ensuite par le glacier, à la base duquel ils s’incorporent par l’effet de la congélation. Le phénomène est d’autant plus marqué que la roche présente d’importantes fractures qui permettent à l’eau de fusion de s’y infiltrer puis de la faire éclater sous l’effet du gel.
Bloc erratique
thumb|Un bloc erratique aux États-Unis. Un bloc erratique est, en géologie et en géomorphologie, un fragment de roche d'origine morainique qui a été déplacé par un glacier, parfois sur de grandes distances. Lors de la fonte du glacier, le bloc erratique est laissé sur place. Louis-Edmond Hamelin désigne le bloc transporté par les glaces de rivière, les glaces marines ou les icebergs, par le terme de bloc glaciel.
Afficher plus

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.