Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This investigation examines experimentally the effect of stators on the performance curves and the heat transfer capabilities of small axial cooling fans. The experimental data indicated that the results are highly affected by the flow conditions at the fa ...
The Advanced Single-stage Planar Actuator (ASPA) is a nanometer-accurate magnetically levitated planar actuator with moving magnets. It is designed at the Eindhoven University of Technology in collaboration with an industrial partner active in the semicond ...
The mathematical formulation of the continuum approach to radiative transfer modeling in two-phase semi-transparent media is numerically validated by comparing radiative fluxes computed by (i) direct, discrete-scale and (ii) continuum-scale approaches. The ...
Background. The small characteristic sizes (in the range of 102 - 103 μm) of Microstructured reactors (MSR) lead to very high specific interfacial area which, in turn, increases heat- and mass transfer efficiency. However, for quasi instantaneous exothermi ...
The analysis of cooling of a binary high T-c superconductor (HTS) 20 kA current lead (CL) operating between 4.5 and 300 K is carried out. We assume that the HTS module is conduction cooled, whereas the cold end of the copper heat exchanger (HEX) is immerse ...
Growing demands for increased functionality in consumer electronics and for information technology-enabled services in various sectors have resulted in the rise of high-performance multiprocessor system-on-chips (MPSoCs) and three-dimensionally stacked int ...
The analysis of cooling of a binary HTS 20 kA current lead (CL) operating between 4.5 and 300 K has been carried out. Assuming that the HTS module is conduction-cooled, two cooling options for the copper heat exchanger (HEX) part of the CL have been consid ...
Although numerous positron emission tomography (PET) studies with ((8) F-fluoro-deoxyglucose) FDG have reported quantitative results on cerebral glucose kinetics and consumption, there is a large variation between the absolute values found in the literatur ...
Flow boiling within microchannels has been explored intensively in the last decade due to their capability to remove high heat fluxes from microelectronic devices. However, the contribution of experiments to the understanding of the local features of the f ...
This study examines experimentally the effect of stators on the performance and heat transfer characteristics of small axial cooling fans. A single fan impeller, followed by nine stator blades in the case of a complete stage, was used for all the experimen ...