Concept

A.T. Mine G.S. Mark II

Résumé

The Anti-Tank Mine General Service Mark II was a British anti-tank blast mine used during the Second World War. It consisted of a body about in diameter and . The mine has a central fuze well accessed from the bottom, with a main charge in a cavity around the well consisting of about of TNT. The mine is fitted with a thin brass cover, which acts as a pressure plate. The cover is suspended over the main body of the main by four leaf springs. A Sorbo ring (Sorbo rubber sponge) can be fitted between the cover and the mine body, which absorbs shock and blast and allows the mines to be planted as close as without causing sympathetic detonation (normally five feet is the minimum safe distance). Sufficient pressure on the cover of the mine causes the cover to press downward onto the pressure cap of the fuze. This downward pressure forces the assembly surrounding the striker down until the striker retaining balls are aligned with a cavity. The balls are pushed aside and the striker is released impacting the detonator which detonates the C.E. pellet, triggering the exploder and then the main charge. The mines main charge was relatively small and the mine appears to have been withdrawn by the end of the war, being replaced by the larger Mk 5 mine. The mine was used in large numbers at the 1942 Second Battle of El Alamein. Year of Introduction: 1937 Diameter: Height: with cover Weight: 8.5 lb (3.9 kg) Operating force: 350 lbf (1.56 kN) Explosive content: 4 lb of TNT (1.

Source officielle

https://en.wikipedia.org/wiki/A.T._Mine_G.S._Mark_II

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.