Acide acrylique

Résumé

L'acide acrylique ou acide acroléique ou acide prop-2-énoïque est un composé organique de formule brute C3H4O2 et de formule semi-développée CH2=CHCOOH. C'est un acide carboxylique et un alcène vinylique, et se présente comme un liquide incolore à l'odeur âcre. Utilisation L'acide acrylique et ses esters, les acrylates, sont utilisés dans la fabrication de matières plastiques, dans les peintures acryliques et dans divers autres polyacryliques qui ont de multiples usages. La demande d'acide acrylique a progressivement augmenté, passant de 3,2 millions de tonnes (2005) à env. 5,57 millions de tonnes (2014). Production L'acide acrylique est produit à partir du propylène, un sous-produit issu du raffinage du pétrole. Dans les années 90, on a utilisé un procédé d'oxydation au propane en une seule étape, en utilisant des compositions catalytiques compliquées (c'est-à-dire des Mo-W-Te-Sn-Co-O et Nb-W- Co-Ni-Bi- Fe-Mn-Si-Zr-O). Actuellement, un procédé en deux étapes

Source officielle

https://fr.wikipedia.org/wiki/Acide_acrylique

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Publications associées (22)

Publications associées

Chargement

Personnes associées (2)

Personnes associées

Chargement

Unités associées (2)

Unités associées

Chargement

Concepts associés (30)

Concepts associés

Chargement

Cours associés (10)

Cours associés

Chargement

Séances de cours associées (12)

Séances de cours associées

Chargement

, , ,

Islet transplantation is a promising approach for the treatment of type 1 diabetes (T1D). Currently, clinical islet transplantation is limited by allo - and autoimmunity that may cause partial or complete loss of islet function within a short period of time, and long-term immunosuppression is required to prevent rejection. Encapsulation into semipermeable biomaterials provides a strategy that allows nutrients, oxygen and secreted hormones to diffuse through the membrane while blocking immune cells and the like out of the capsule, allowing long-term graft survival and avoiding long-term use of immunosuppression. In recent years, a variety of engineering strategies have been developed to improve the composition and properties of encapsulation materials and to explore the clinical practicality of islet cell transplantation from different sources. In particular, the encapsulation of porcine islet and the co-encapsulation of islet cells with other by-standing cells or active ingredients for promoting long-term functionality, attracted significant research efforts. Hydrogels have been widely used for cell encapsulation as well as other therapeutic applications including tissue engineering, cell carriers or drug delivery. Here, we review the current status of various hydrogel biomaterials, natural and synthetic, with particular focus on islet transplantation applications. Natural hydrophilic polymers include polysaccharides (starch, cellulose, alginic acid, hyaluronic acid, chitosan) and peptides (collagen, poly-L-lysine, poly-L-glutamic acid). Synthetic hydrophilic polymers include alcohol, acrylic acid and their derivatives [poly (acrylic acid), poly (methacrylic acid), poly(acrylamide)]. By understanding the advantages and disadvantages of materials from different sources and types, appropriate materials and encapsuling methods can be designed and selected as needed to improve the efficacy and duration of islet. Islet capsule transplantation is emerging as a promising future treatment for T1D.

2022

Chargement

Design of amphiphilic nanocapsules based on hyperbranched star-block copolymers for the encapsulation and the controlled release of olfactory compounds

Céline Ternat

Effective encapsulation of small, volatile, weakly water-soluble molecules such as flavors and fragrances is necessary to protect them from degradation, to increase their lifetime, and to improve their water dispersion and fixation depending on the substrate of interest. The aim of this project has been to improve encapsulation and release in order to optimize the performance of fragrance molecules in water-based household (detergents, softeners, etc.) and body care applications (shampoos, lotions, etc.), and fine perfumery applications. More specifically, the aim has been to investigate the effectiveness of "unimolecular micelles" based on amphiphilic multi-arm star-block copolymers with a hyperbranched core with more than 26 functional groups, a hydrophobic inner and a hydrophilic outer shell. These have been prepared from a commercial hyperbranched polyester macroinitiator (HBP) by ring-opening polymerization of ε-caprolactone, followed by the atom transfer radical polymerization (ATRP) of tert-butyl acrylate (tBuA). Hydrolysis of the tert-butyl groups has then been used to convert the poly(tBuA) blocks to poly(acrylic acid) (PAA), resulting in HBP-(PCL)p-(PAA)q pH-dependent amphiphilic star-block copolymers with good control of the molecular weight distribution. These were shown to form stable nanocapsules with a well defined core-shell architecture, as confirmed by thermal and microstructural characterization. The necessity of the core-shell architecture for the effective encapsulation of fragrance molecules in aqueous dispersion has been demonstrated by NMR (nuclear magnetic resonance). The extent of encapsulation reflects the dynamic equilibrium between the free molecules and the fragrance/polymer complex and is dependent on the octanol/water partition coefficient (logP) of the fragrance compounds, as demonstrated with a similar non ionic core-shell architecture HBP-(PBMA)37-(PPEGMA)39 composed of a hydrophobic poly(butyl methacrylate) (PBMA) core and a hydrophilic poly(polyethylene glycol) methyl ether methacrylate (PPEGMA) shell (provided by the Polymer Laboratory of the EPFL). The fragrance loadings in the polymer (HBP-(PCL)p-(PAA)q and HBP-(PBMA)37-(PPEGMA)39), which reached up to 30 wt% depending on the type of the fragrance molecule, were argued to be linked to their solubility in the hydrophobic core of the star-block copolymer. Moreover, under conditions representative of real applications (fine perfumery and softener applications) the star-block copolymers significantly extended the time over which the concentration of certain volatiles remained above the human olfactory threshold. Effective encapsulation and delayed release of small hydrophobic molecules was hence demonstrated to be possible with the present systems. The straightforward synthesis, tailorable chemistry and globular architecture of the star-block copolymers investigated here therefore offer promise for the development of relatively cheap encapsulants with affinities for specific components in fragrance packages, and release triggered by selected substrates according to their surface chemistry.

EPFL2007

Chargement

Preparation of Highly Porous Metal-Organic Framework Beads for Metal Extraction from Liquid Streams

Hassan Abedini, Anita Justin, Ilia Kochetygov, Guanchu Lu, Emadeddin Oveisi, Li Peng, Wendy Lee Queen, Daniel Teav Sun, Olga Syzgantseva, Olga Trukhina, Shuliang Yang

Metal-organic frameworks (MOFs) offer great promise in a variety of gas- and liquid-phase separations. However, the excellent performance on the lab scale hardly translates into pilot- or industrial-scale applications due to the microcrystalline nature of MOFs. Therefore, the structuring of MOFs into pellets or beads is a highly solicited and timely requirement. In this work, a general structuring method is developed for preparing MOF-polymer composite beads based on an easy polymerization strategy. This method adopts biocompatible, biodegradable poly(acrylic acid) (PAA) and sodium alginate monomers, which are cross-linked using Ca2+ ions. Also, the preparation procedure employs water and hence is nontoxic. Moreover, the universal method has been applied to 12 different structurally diverse MOFs and three MOF-based composites. To validate the applicability of the structuring method, beads consisting of a MOF composite, namely Fe-BTC/PDA, were subsequently employed for the extraction of Pb and Pd ions from real-world water samples. For example, we find that just 1 g of Fe-BTC/PDA beads is able to decontaminate >10 L of freshwater containing highly toxic lead (Pb) concentrations of 600 ppb while under continuous flow. Moreover, the beads offer one of the highest Pd capacities to date, 498 mg of Pd per gram of composite bead. Furthermore, large quantities of Pd, 7.8 wt %, can be readily concentrated inside the bead while under continuous flow, and this value can be readily increased with regenerative cycling.

AMER CHEMICAL SOC2020

Chargement

Design of amphiphilic nanocapsules based on hyperbranched star-block copolymers for the encapsulation and the controlled release of olfactory compounds

Céline Ternat

EPFL2007

, , ,

2022