Publications associées à Ferrite core

Modeling and optimization of PCB coils for inductive power transfer systems

The auxiliary power supply for medium voltage converters requires high insulation capability between the source and the load. Inductive power transfer technology, with an air gap between the primary and secondary coil, offers such high insulation capabilit ...

EPFL2024

Enhanced Leaching of Zinc Ferrite by the Formation of a Solid Solution With Magnetite in Hydrochloric Acid Solution

The high zinc and iron contents of electric arc furnace (EAF) dust in the forms of zinc ferrite (ZnFe2O4) and magnetite (Fe3O4) make it a valuable secondary source of these metals. ZnFe2O4 and Fe3O4 are known to form a solid solution at all compositions, a ...

SPRINGER2023

An Implantable Inductive Sensor for Direct and Continuous Monitoring of the Pulmonary Artery Cross-Sectional Area

Marco Mattavelli, Catherine Dehollain, Diego Ruben Barrettino, Kerim Türe, Mustafa Besirli

This paper presents a novel method for the measure of the cross-sectional area (CSA) of an artery to be used for the direct and continuous (24/7) monitoring of cardiac output (CO). The method is based on the inductance change of an anchoring loop mounted o ...

IEEE2022

Thermally-Compensated Magnetic Core Loss Model for Time-Domain Simulations of Electrical Circuits

Drazen Dujic, Min Luo, Nikolina Djekanovic

This paper introduces a thermally-compensated magnetic hysteresis model, capable of accurately determining core losses of ferrite materials while accounting for core temperature variations. The employed model is based on permeance-capacitance analogy and i ...

2021

Characterization of untransformed ferrite in 10Cr and 12Cr ODS steels

Roland Logé

Two new ferrito-martensitic oxide dispersion strengthened (ODS) steels reinforced with (Y, Ti, O) nanoparticles were elaborated using a high-energy attritor. The milled powder was consolidated by hot extrusion at 1050 degrees C. The two types of ODS steels ...

ELSEVIER SCI LTD2021

97.4%-Efficient All-GaN Dual-Active-Bridge Converter with High Step-up High-Frequency Matrix Transformer

Elison de Nazareth Matioli, Armin Jafari, Palliyage Srilak Nirmana Perera, Mohammad Samizadeh Nikooytabalvandani

In this work, we demonstrate a state-of-the-art high step-up/down dual-active-bridge (DAB) converter designed with GaN transistors, to achieve a high efficiency and large power-density. A quasi-planar matrix transformer with high step-up/down ratio is demo ...

2020

Integrated Simulation Approach to Loss Calculations of Power Converter Systems

Drazen Dujic, Min Luo, Nikolina Djekanovic

There is a strong need in the power electronics community to have design tools capable of performing simultaneous simulations in different domains, e.g. electric, magnetic, dielectric and thermal. Therefore, this paper presents an approach to the calculati ...

2020

Breaking of Internal Waves and Turbulent Dissipation in an Anticyclonic Mode Water Eddy

Bieito Fernandez Castro

A four-month glider mission was analyzed to assess turbulent dissipation in an anticyclonic eddy at the western boundary of the subtropical North Atlantic. The eddy (radius ≈ 60 km) had a core of low potential vorticity between 100–450 m, with maximum radi ...

2020

Dynamic Modeling of Magnetic Components for Circuit Simulation of Power Electronic Systems

Min Luo

Magnetic components play an important role in a power electronic converter system. They provide energy buffering, galvanic isolation and voltage ratio conversion and have significant impact on the overall performance of the system regarding power efficienc ...

EPFL2018

Study and Characterization of Magnetic Materials for Beam Intensity Monitors at CERN

Silvia Aguilera Murciano

The number of particles in the beams used at CERN is measured by a family of devices called the Beam Current Transformers (BCTs). One of such devices is the DC Current Transformer (DCCT) measuring the total number of particles in an accelerator. The DCCT i ...

EPFL2018