Publications associées à Polyimide

Characterization of a flexible a-Si:H detector for in vivo dosimetry in therapeutic x-ray beams

Sylvain Dunand, Nicolas Würsch, Luca Massimiliano Antognini, Jonathan Emanuel Thomet, Matthew James Large

BackgroundThe increasing use of complex and high dose-rate treatments in radiation therapy necessitates advanced detectors to provide accurate dosimetry. Rather than relying on pre-treatment quality assurance (QA) measurements alone, many countries are now ...

Wiley2024

Atomic-scale Characterization of Strain and Gate effects on Two-dimensional Materials by Scanning Tunneling Microscopy

Jz -Yuan Juo

Strain is an inevitable phenomenon in two-dimensional (2D) material, regardless of whether the film is suspended or supported. Moreover, strain is known to alter the physical and chemical properties, such as the band gap, charge carrier effective masses, d ...

EPFL2023

A life cycle analysis of novel lightweight composite processes: Reducing the environmental footprint of automotive structures

Véronique Michaud, Baris Çaglar, Colin Gomez, Vincent Werlen, Christian Rytka

In this study, three novel thermoplastic impregnation processes were analyzed towards automotive applications. The first process is thermoplastic compression resin transfer molding in which a glass fiber mat is impregnated in through thickness by a thermop ...

ELSEVIER SCI LTD2022

A Kilometre-range Distributed Relative Humidity Fibre Sensor

Tiago Filipe Pimentel Das Neves

Fibre optics sensors have been identified as very good candidates for environmental monitoring inside the silicon detectors operated at CERN's Large Hadron Collider. The objective of this dissertation is the development of a Relative Humidity (RH) distribu ...

EPFL2022

Multiscale microshaping of functionally graded polymer-derived SiCN ceramics

Lorenz Hagelüken

Polymer-derived ceramics (PDCs) exhibit excellent properties and are compatible with many shaping techniques due to the liquid character of the preceramic polymers (PCPs). Furthermore, their properties are adjustable by modifying the precursor composition ...

EPFL2022

Ultralow secondary electron emission and improved vacuum surface insulation of polyimide with scalable nanocomposite coating

Chao Wang, Guang-Yu Sun

Polymers with high surface electric insulation capability are greatly demanded in various electrical devices operating in vacuum ambient. Low secondary electron emission (SEE) is favorable to mitigate vacuum flashover by inhibiting the SEE avalanche across ...

ELSEVIER2022

Advanced methods for Brillouin based distributed optical fiber sensors

Simon Adrien Zaslawski

After more than thirty years of continuous research and development, the performances of conventional Brillouin based distributed optical fiber sensors (DOFS) are now peaking, as they are facing fundamental barriers that restrict the power of the light inj ...

EPFL2021

Semiaromatic polyamides with enhanced charge carrier mobility

John Christopher Plummer, Holger Frauenrath, Nicolas Candau

The control of local order in polymer semiconductors using non-covalent interactions may be used to engineer materials with interesting combinations of mechanical and optoelectronic properties. To investigate the possibility of preparing n-type polymer sem ...

ROYAL SOC CHEMISTRY2021

Soft Printable Electrode Coating for Neural Interfaces

Stéphanie Lacour, Grégoire Courtine, Quentin Barraud, Florian Dylan Fallegger, Elvira Pirondini, Michael Shur, Arnaud Bichat

The mechanical mismatch between implantable interfaces and neural tissues may be reduced by employing soft polymeric materials. Here, we report on a simple strategy to prepare and pattern a soft electrode coating of neural interfacing devices based on a sc ...

2020

Highly Loaded Mildly Edge‐Oxidized Graphene Nanosheet Dispersions for Large‐Scale Inkjet Printing of Electrochemical Sensors

Hubert Girault, Horst Pick, Andreas Stephan Lesch, Milica Jovic, Victor Costa Bassetto, Yingdi Zhu, Bhawna Nagar

Inkjet printing of electrochemical sensors using a highly loaded mildly edge‐oxidized graphene nanosheet (EOGN) ink is presented. An ink with 30 mg/mL EOGNs is formulated in a mixture of N‐methyl pyrrolidone and propylene glycol with only 30 min of sonicat ...

2020