Publications associées à Poly(butyral vinylique)

Numerical analysis of fragmentation in tempered glass with parallel dynamic insertion of cohesive elements

Jean-François Molinari, Mauro Corrado, Marco Vocialta

Tempered glass panes are subjected to high eigenstresses that induce a state of compression along the surfaces and a state of tension in the inner part. Whenever a crack reaches the tensile region, it rapidly propagates and branches in all directions drive ...

2018

Preliminary studies on the mechanical behaviour of thick embedded laminated connections

Pieter Christian Louter, Manuel Santarsiero

Laminated glass components are usually realized bonding glass plates by means of interlayer polymers that develop adhesion forces during lamination. Recently, these adhesion forces have been used also to realize adhesive connections for structural glass co ...

Glaston Finland Oy2015

Long-term laminated glass four point bending test with PVB, EVA and SG interlayers at different temperatures

Jean-Paul Lebet, Pieter Christian Louter, Tomas Serafinavicius

This paper presents the results of long term experiments of four point bending test with structural laminated glass plates. For experiments 6 mm thick annealed Soda-Lime-Silica Glass and three different interlayer laminates were used: Polyvinyl butyral (PV ...

Elsevier2013

Experimental and numerical investigations of metal-to-glass embedded connections with thin stainless steel plate

Pieter Christian Louter, Manuel Santarsiero

The recent demand for architectural transparency has drastically increased the use of glass material also for structural purpose. However, connections between structural glass members represent one of the most critical aspects of glass engineering, due to ...

Taylor & Francis Group2013

Numerical analyses of the effect of SG-interlayer shear stiffness on the structural performance of reinforced glass beams

Pieter Christian Louter

This paper focuses on the numerical modelling of SentryGlas-laminated reinforced glass beams. In these beams, which have been experimentally investigated in preceding research, a stainless steel reinforcement section is laminated at the inner recessed edge ...

Taylor & Francis Group2013

Novel Laminated Connections

Manuel Santarsiero

As an alternative to standard adhesive connections, the PhD research project ‘Novel Laminated Connections for Structural Glass Applications’, which recently started at the ICOM-EPFL, focuses on the use of polymer foil/interlayer materials to laminate (meta ...

University Press2012

Compressive-shear adhesion characterization of polyvinyl-butyral and ethylene-vinyl acetate at different curing times before and after exposure to damp-heat conditions

Christophe Ballif, Hengyu Li, Laure-Emmanuelle Perret Aebi, Valentin Chapuis

Photovoltaic (PV) module efficiency and reliability are two factors that have an important impact on the final cost of the PV electricity production. It is widely accepted that a good adhesion between the encapsulant and the different substrates of a PV mo ...

Wiley-Blackwell2012

Durability of SG-laminated reinforced glass beams: effects of temperature, thermal cycling, humidity and load-duration

Jean-Paul Lebet, Pieter Christian Louter

This paper investigates the durability of structural glass beams that are composed of annealed glass, stainless steel reinforcement and SG (SentryGlas®) interlayer sheets. To do so, a series of pull-out tests (to investigate the shear transfer capacity of ...

Elsevier2012

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Poly(butyral vinylique)

Numerical analysis of fragmentation in tempered glass with parallel dynamic insertion of cohesive elements

Preliminary studies on the mechanical behaviour of thick embedded laminated connections

Long-term laminated glass four point bending test with PVB, EVA and SG interlayers at different temperatures

Experimental and numerical investigations of metal-to-glass embedded connections with thin stainless steel plate

Numerical analyses of the effect of SG-interlayer shear stiffness on the structural performance of reinforced glass beams

Novel Laminated Connections

Compressive-shear adhesion characterization of polyvinyl-butyral and ethylene-vinyl acetate at different curing times before and after exposure to damp-heat conditions

Durability of SG-laminated reinforced glass beams: effects of temperature, thermal cycling, humidity and load-duration

THE RIGHT WAY TO CHARACTERIZE ADHESION OF POLYMERS IN PV MODULES

Graph Chatbot

Chattez avec Graph Search

Novel Laminated Connections

Long-term laminated glass four point bending test with PVB, EVA and SG interlayers at different temperatures

Numerical analysis of fragmentation in tempered glass with parallel dynamic insertion of cohesive elements

Preliminary studies on the mechanical behaviour of thick embedded laminated connections

Compressive-shear adhesion characterization of polyvinyl-butyral and ethylene-vinyl acetate at different curing times before and after exposure to damp-heat conditions

Experimental and numerical investigations of metal-to-glass embedded connections with thin stainless steel plate

Durability of SG-laminated reinforced glass beams: effects of temperature, thermal cycling, humidity and load-duration

THE RIGHT WAY TO CHARACTERIZE ADHESION OF POLYMERS IN PV MODULES

Numerical analyses of the effect of SG-interlayer shear stiffness on the structural performance of reinforced glass beams