Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Microcellular Al-4.5 wt pct Cu of 400- or 75-mu m average pore diameter is solidified at cooling rates ranging from -30 K/min to -0.45 K/min (-30 A degrees C/min to -0.45 A degrees C/min). In the 400-mu m pore size samples, the dendritic character is lost, ...
With the progress of miniaturization, in many modern applications the characteristic dimensions of the physical volume occupied by particle-reinforced composites are getting comparable with the reinforcement size and many of those composite materials under ...
Al/SiC composites with volume fractions of SiC between 0.55 and 0.71 were made from identical tapped and vibrated powder preforms by squeeze casting (SC) and by two different setups for gas pressure infiltration (GPI), one that allows short (1-2 min) liqui ...
It has been proposed in the literature, based on theoretical considerations and on finite-element calculations, that all three stress tensor invariants govern the yield surface of cellular materials. Recent experiments on 75 gm pore size aluminium replicat ...
To generate high-level redundancy for structural glass beams, a novel concept of laminating a metal reinforcement to a structural glass beam has been developed at Delft University of Technology (TU Delft). This concept makes use of the relatively stiff pol ...
This paper investigates the possibilities of pultruded glass fibre rods as embedded reinforcement in SentryGlas (SG) laminated glass beams. To do so, a series of pullout tests, to investigate the bond strength of the rods to the laminate, and a series of b ...
The subject of this work is focused on characterization of the microstructures and orientations of SiC crystals synthesized in diamond–SiC–Si composites using reactive microwave sintering. The SiC crystals grown on the surfaces of diamonds have either shap ...
Magnesium matrix composites made of pure (99.98%) magnesium reinforced with long carbon (Mg/C) and stainless steel (Mg/steel) fibers were processed by low pressure infiltration method. Mg/C composites were then oriented from the crystallographic point of v ...
We present an analytical micromechanical model designed to simulate the tensile stress-strain behaviour and failure of damaging composites containing a high volume fraction of reinforcing particles. One internal damage micromechanism is considered, namely ...
Negative Poisson's ratio behavior has been uncovered in cellular solids that comprise a solid matrix with a square array of circular voids. The simplicity of the fabrication implies robust behavior, which is relevant over a range of scales. The behavior re ...
