Le terme « drainage » n’apparaît pas avant le en français. « Drainage », de même que « drainer », « drain », « draineur », sont empruntés à l'anglais au milieu (anglicismes). Le terme en français a d'abord eu une connotation agricole, d'assainissement des terres pour l'agriculture. Le mot provient du vieil anglais « dreahnian », « to drain, strain out » « égoutter », du proto-germanique *dreug-, à l'origine des mots « drought », sécheresse, ou « dry », sec, donnant au mot anglais « drainage » d'origine, le sens de « make dry », « sécher ».
Well drainage means drainage of agricultural lands by wells. Agricultural land is drained by pumped wells (vertical drainage) to improve the soils by controlling water table levels and soil salinity. Subsurface (groundwater) drainage for water table and soil salinity in agricultural land can be done by horizontal and vertical drainage systems. Horizontal drainage systems are drainage systems using open ditches (trenches) or buried pipe drains. Vertical drainage systems are drainage systems using pumped wells, either open dug wells or tube wells.
vignette|Drainage agricole. En agriculture, sylviculture et parfois dans le domaine de l'urbanisme, le drainage est une opération qui consiste à provoquer artificiellement l'évacuation de l'eau gravitaire présente dans la macro-porosité du sol à la suite de précipitations. Le drainage a été intensivement pratiqué dans presque tous les bassins hydrographiques d'Europe de l’Ouest, dans certaines zones d’Asie, puis d’Amérique du Nord, non sans impacts hydrologiques et écologiques.
An agricultural drainage system is a system by which water is drained on or in the soil to enhance agricultural production of crops. It may involve any combination of stormwater control, erosion control, and watertable control. While there are more than two types of drainage systems employed in agriculture, there are two main types: (1) surface drainage and (2) sub-surface drainage. Figure 1 classifies the various types of drainage systems. It shows the field (or internal) and the main (or external) systems.
A drainage equation is an equation describing the relation between depth and spacing of parallel subsurface drains, depth of the watertable, depth and hydraulic conductivity of the soils. It is used in drainage design. A well known steady-state drainage equation is the Hooghoudt drain spacing equation. Its original publication is in Dutch. The equation was introduced in the USA by van Schilfgaarde. Hooghoudt's equation can be written as:.