Attenuation coefficientThe linear attenuation coefficient, attenuation coefficient, or narrow-beam attenuation coefficient characterizes how easily a volume of material can be penetrated by a beam of light, sound, particles, or other energy or matter. A coefficient value that is large represents a beam becoming 'attenuated' as it passes through a given medium, while a small value represents that the medium had little effect on loss. The SI unit of attenuation coefficient is the reciprocal metre (m−1).
Attenuation lengthIn physics, the attenuation length or absorption length is the distance λ into a material when the probability has dropped to 1/e that a particle has not been absorbed. Alternatively, if there is a beam of particles incident on the material, the attenuation length is the distance where the intensity of the beam has dropped to 1/e, or about 63% of the particles have been stopped. Mathematically, the probability of finding a particle at depth x into the material is calculated by the Beer–Lambert law: In general λ is material- and energy-dependent.
AtténuationEn électronique, l’atténuation ou affaiblissement est la diminution relative de la puissance d'un signal au cours de sa transmission. C'est la quantité par laquelle il faut multiplier la valeur du signal à la sortie pour obtenir celle à l'entrée de la section considérée. vignette|upright=0.5|Sonde L'atténuation, que ce soit dans une ligne de transmission ou dans un faisceau hertzien, est une grandeur importante dans les télécommunications, dont elle est un facteur limitatif.
Molar absorption coefficientIn chemistry, the molar absorption coefficient or molar attenuation coefficient (ε) is a measurement of how strongly a chemical species absorbs, and thereby attenuates, light at a given wavelength. It is an intrinsic property of the species. The SI unit of molar absorption coefficient is the square metre per mole (), but in practice, quantities are usually expressed in terms of M−1⋅cm−1 or L⋅mol−1⋅cm−1 (the latter two units are both equal to ). In older literature, the cm2/mol is sometimes used; 1 M−1⋅cm−1 equals 1000 cm2/mol.
Effet Augerthumb|280px|Deux vues de l'effet Auger : (a) illustre séquentiellement les étapes impliquées dans la désexcitation Auger. Un électron incident (ou un photon) crée un trou de cœur dans le niveau 1s. Un électron du niveau 2s remplit le trou 1s et l'énergie de transition est transmise à un électron 2p qui est émis. Le niveau atomique final a ainsi deux trous, un sur l'orbitale 2s et un autre sur l'orbitale 2p. (b) illustre le même processus en utilisant la notation spectroscopique KL1L2,3.