Publications de Andreas Mortensen

On the preparation and mechanical testing of nano to micron-scale specimens

Over the past two decades, means allowing to probe experimentally the mechanical behavior of materials specimens only a few micrometers or less in diameter have multiplied, largely owing to the widespread adoption and versatility of focused ion beam (FIB) ...

2025

Influence of Testing Temperature on the Mechanical Performance of Brazed Conventionally and Additively Manufactured 316L Stainless Steel Joints

Andreas Mortensen, Raphaël Charvet

In this work, brazed joints between samples of 316L stainless steel (316LSS) are formed using the Ag155 brazing filler metal. As an additional aspect of the investigation, the joints combine stainless steel formed by conventional processing and by additive ...

Wiley2025

Nanoindentation hardness and modulus of Al2O3-SiO2-CaO and MnO-SiO2-FeO inclusions in iron

Andreas Mortensen, David Hernandez Escobar, Léa Deillon, Alejandra Inés Slagter, Eva Luisa Vogt, Jonathan Aristya Setyadji

Dataset corresponding to the following manuscript: Slagter, A., Setyadji, J.A., Vogt, E.L. et al. Nanoindentation Hardness and Modulus of Al2O3–SiO2–CaO and MnO–SiO2–FeO Inclusions in Iron. Metall Mater Trans A (2024). https://doi.org/10.1007/s11661-024-0 ...

Zenodo2024

Nanoindentation Hardness and Modulus of Al2O3-SiO2-CaO and MnO-SiO2-FeO Inclusions in Iron

Andreas Mortensen, David Hernandez Escobar, Léa Deillon, Alejandra Inés Slagter, Eva Luisa Vogt, Jonathan Aristya Setyadji

Oxide inclusions appear in steel as a subproduct of steelmaking. These are generally detrimental to alloy properties; however, variations exist in the extent to which different inclusions are harmful because their properties vary as a function of their che ...

SPRINGER2024

On the slip burst amplitude cutoff in dislocation-rich microcrystals

Andreas Mortensen, Luciano Borasi

The plastic deformation of small-scale face-centered cubic metals exhibits intermittent slip burst events that appear on stress-strain curves as sudden strain jumps and/or load drops. These events are generally attributed to the avalanche-like cooperative ...

Pergamon-Elsevier Science Ltd2023

Nanoindentation of embedded particles

Andreas Mortensen, Alejandra Inés Slagter, Joris Pierre Everaerts

We address the effect of elastic inhomogeneity on elastic modulus and hardness determinations made by depth-sensing indentations performed on individual particles embedded within a matrix of different elastic modulus. Finite element simulations and nanoind ...

SPRINGER HEIDELBERG2023

Room-temperature strength of the interfacial bond between silica inclusions and iron

Andreas Mortensen, Alejandra Inés Slagter, David Hernandez Escobar, Sergio Perosanz Amarillo

The strength of the interface between iron (Fe) and individual spherical silica (SiO2) inclusions of 5 +/- 1 mu m diameter is measured by means of in-situ micro-cantilever bending tests conducted under displacement control within a scanning electron micros ...

Pergamon-Elsevier Science Ltd2023

Intermittent tensile deformation of silver microcastings: Influence of the strain rate

Andreas Mortensen, Luciano Borasi

We compare the uniaxial tensile behavior of mu m-scale cast silver tensile specimens at strain rates of 10(-3 )s(-1) and 2 s(-1) to find no major impact of the strain rate on either of the flow stress, work hardening, or strain to fracture. Plastic deforma ...

Pergamon-Elsevier Science Ltd2023

Phase Transformation-Induced Interfacial Debonding of Silica Inclusions in Iron

Andreas Mortensen, David Hernandez Escobar, Julie Nathalie S Gheysen, Alejandra Inés Slagter

We document that in unstressed, undeformed, samples of pure iron containing silica inclusions precipitated by melt deoxidation, the iron matrix and a small fraction of the silica inclusions are locally separated at room temperature by a void. Thermal cycli ...

Springer2023

The effect of size, orientation and temperature on the deformation of microcast silver crystals

Edoardo Charbon, Andreas Mortensen, Simone Frasca, Luciano Borasi

Monocrystalline microwires of silver are produced by means of a novel casting process that combines precise mold production by silicon microfabrication with molten metal pressure infiltration. The wires have a shape amenable to tensile testing and a diamet ...

PERGAMON-ELSEVIER SCIENCE LTD2023