Helena Van Swygenhoven

À propos
Confidentialité
Mentions légales

Graph Chatbot

Publications associées (65)

Measurement and prediction of the transformation strain that controls ductility and toughness in advanced steels

William Curtin, Helena Van Swygenhoven, Francesco Maresca, Efthymios Polatidis

New-generation multi-phase martensitic steels derive their high strength from the body-centered cubic (BCC) phase and high toughness from transformation of the metastable face-centered cubic (FCC) austenite that transforms into martensite upon loading. In ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Operando X-ray diffraction during laser 3D printing

Helena Van Swygenhoven, Steven Van Petegem, Samy Hocine, Nicola Casati

Laser based additive manufacturing allows to build a designed shape layer-by-layer, offering versatility and flexibility to many metallurgical sectors. The fast cooling rates and repeated heat cycles depending on the laser and scanning parameters are not e ...

2020

Influence of thermo-mechanical history on the ordering kinetics in 18 carat Au alloys

Nadine Baluc, Helena Van Swygenhoven, Steven Van Petegem, Marina Garcia Gonzalez

Precious alloys are subjected to a series of mechanical and thermal operations during manufacturing. For 18 carat gold alloys the processing operations can induce L1(0) ordered nanodomains, known to lead to the buildup of residual stresses, which are the p ...

PERGAMON-ELSEVIER SCIENCE LTD2020

The interplay between deformation mechanisms in austenitic 304 steel during uniaxial and equibiaxial loading

Helena Van Swygenhoven, Efthymios Polatidis, Wei-Neng Hsu

The preferred deformation mechanisms with respect to the load path are studied in a medium stacking fault energy 304 austenitic stainless steel that exhibits both transformation induced plasticity and twinning induced plasticity. In situ neutron diffractio ...

2019

In situ tension-tension strain path changes of cold-rolled Mg AZ31B

Helena Van Swygenhoven, Steven Van Petegem

The mechanical behavior of cold-rolled Mg AZ31B is studied during in-plane multiaxial loading and tension-tension strain path changes performed on cruciform samples using in situ neutron diffraction and EBSD. The results are compared with uniaxial tension ...

2019

Following Microstructures during Deformation: In situ X-ray/Neutron Diffraction and HRDIC

Helena Van Swygenhoven, Efthymios Polatidis

The mechanical behavior of three engineering materials is studied employing in situ deformation methods. The study covers metastable austenitic steels with different stacking fault energies during multiaxial loading, a Ti-6Al-4V alloy processed by electron ...

IOP PUBLISHING LTD2019

In situ characterization of work hardening and springback in grade 2 alpha-titanium under tensile load

Helena Van Swygenhoven

Plastic effects during sheet metal forming can lead to undesirable distortions in formed components. Here, the three-stage work hardening and plastic strain recovery ("springback") in a cold-rolled, alpha-phase commercially pure titanium is examined. Inter ...

2019

In situ characterization of a high work hardening Ti-6Al-4V prepared by electron beam melting

Helena Van Swygenhoven, Karl Alan Sofinowski, Nicola Casati

A multi-phase Ti-6Al-4V prepared by electron beam melting and thermal post treatments has been shown to exhibit increased strength and ductility over standard wrought or hot isostatic pressed Ti-6-Al-4V. The mechanical improvements are due to a prolonged, ...

2019

Laue microdiffraction characterisation of as-cast and tensile deformed Al microwires

Andreas Mortensen, Helena Van Swygenhoven, Léa Deillon, Steven Van Petegem, Suzanne Godelieve Alphonsine Verheyden

Single-crystalline cast aluminium microwires with a diameter near 15 are characterised by Laue microdiffraction. A microwire in the as-cast condition exhibits a misorientation below over a length of 500 . The measured density of geometrically necessary dis ...

TAYLOR & FRANCIS LTD2019

Enhanced precipitate growth at reduced temperatures during chemical ordering in deformed red gold alloys

Nadine Baluc, Helena Van Swygenhoven, Steven Van Petegem, Marina Garcia Gonzalez, Samy Hocine

Manufacturing of red gold components relies widely on controlling the formation of ordered precipitates during thermo-mechanical processing. The ordered phase hardens the material, makes it less workable and introduces residual stresses. We show that an in ...

PERGAMON-ELSEVIER SCIENCE LTD2019

Page 2 sur 7