Publications de Jonathan Friedli

Crushing and intrusion resistance improvement of aluminum beams by carbon/epoxy composite patches

Véronique Michaud, Baris Çaglar, Jonathan Friedli, Yann Albert Gérard Lebaupin, Mathieu Piccand

This study investigates the intrusion and crushing performance of hybrid fiber metal laminates based on aluminum and carbon fiber reinforced polymers, in comparison to reference aluminum parts, made from AA6451 or AA7075 automotive grade alloys. A first se ...

ELSEVIER SCI LTD2019

Dendritic Growth Morphologies in Al-Zn Alloys-Part II: Phase-Field Computations

Michel Rappaz, Jonathan Friedli, Paolo Di Napoli, Jonathan Dantzig

In Part I of this article, the role of the Zn content in the development of solidification microstructures in Al-Zn alloys was investigated experimentally using X-ray tomographic microscopy. The transition region between dendrites found at low Zn content a ...

Springer Verlag2013

Dendritic Growth Morphologies in Al-Zn Alloys-Part I: X-ray Tomographic Microscopy

Michel Rappaz, Jonathan Friedli, Paolo Di Napoli

Upon solidification, most metallic alloys form dendritic structures that grow along directions corresponding to low index crystal axes, e.g., directions in fcc aluminum. However, recent findings[1,2] have shown that an increase in the zinc content in Al-Zn ...

Springer Verlag2013

X-ray tomographic microscopy analysis of the dendrite orientation transition in Al-Zn

Michel Rappaz, Jonathan Friedli, Paolo Di Napoli

Recently, Gonzales and Rappaz [Met. Mat. Trans. A37:2797, 2006] showed the influence of an increasing zinc content on the growth directions of aluminum dendrites. < 100 > and < 110 > dendrites were observed below 25wt.% and above 55wt.% zinc, respectively, ...

Iop Publishing Ltd2012

Phase-field modeling of the dendrite orientation transition in Al-Zn alloys

Michel Rappaz, Jonathan Friedli, Jonathan Dantzig, Paolo Di Napoli

With a few exceptions, phase-field simulations of dendritic growth in cubic materials have been modeled using simple expressions for the interfacial energy anisotropy and with strong anisotropy. However, recent experimental results show that the Dendrite O ...

Iop Publishing Ltd2012

Interfacial Energy Anisotropy and Growth Morphologies in Aluminium-Zinc Alloys

Jonathan Friedli

This thesis presents an investigation aimed at the understanding of the effect of interfacial energy anisotropy on growth morphologies in Al-Zn alloys. Most low alloyed metals form dendritic structures that grow along directions that correspond to low inde ...

EPFL2011

The influence of solid-liquid interfacial energy anisotropy on equilibrium shapes, nucleation, triple lines and growth morphologies

Michel Rappaz, Mario Alberto Salgado Ordorica, Jonathan Friedli, Aurèle Mariaux

The anisotropy of the solid-liquid interfacial energy plays a key role during the formation of as-solidified microstructures. Using the xi-vector formalism of Cahn and Hoffman, this contribution presents the effect that anisotropy has on the equilibrium sh ...

Elsevier2010

PHASE FIELD MODELING OF EQUILIBRIUM SHAPES AND GROWTH MORPHOLOGIES IN Al-Zn ALLOYS

Michel Rappaz, Jonathan Friedli, Aurèle Mariaux

The anisotropy of the solid-liquid interfacial energy, gamma(sl), plays a key role in the accurate prediction of growth morphologies in metallic alloys. This interfacial energy anisotropy can vary duo to alloy composition, especially when that of the pure ...

Minerals, Metals & Materials Soc, 184 Thorn Hill Rd, Warrendale, Pa 15086-7514 Usa2009