Physical punching shear models such as the Critical Shear Crack Theory (CSCT), which is the basis of Model Code 2010 (MC 2010), describe generally the punching strength as a function of the slab deformation. Thus, the prediction of an accurate load-deforma ...
Punching shear reinforcement is an efficient method to increase not only the strength but also the deformation capacity of flat slabs supported by columns. Especially, the increase in deformation capacity is desired so that the load can be distributed to o ...
This paper presents the results of an extensive experimental campaign on 16 flat-slab specimens with and without punching shear reinforcement. The tests aimed to investigate the influence of a set of mechanical and geometrical parameters on the punching sh ...
Over the past century, the use of flat slabs in buildings and especially in parking garages has been growing as it is an economic and efficient solution. Flat slabs are easy to build and have, through their smaller depth, an economical and architectural ad ...
Bent-up bars were extensively used as shear reinforcement in beams and slabs from the first R/C developments up to the 1970’s. Their use was justified by the fact that they allowed enhanced development of the tensile reinforcement at the same time they act ...
