Publications de Fang Liu | EPFL Graph Search

Optimization of X-mode electron cyclotron current drive in high-electron-temperature plasma in the EAST tokamak

A discharge with electron temperature up to 14 keV has been achieved in EAST. Analysis of the electron cyclotron current drive (ECCD) efficiency at high electron temperature under EAST parameters is presented using C3PO/LUKE code. Simulation results show t ...

2023

In situ detection of multitarget impurities on contact lens by electrochemical scanning probe

Fang Liu, Tzu-En Lin, Yingdi Zhu

Identifying multitarget impurities on contact lenses is challenging because traditional methods such as polymerase chain reaction cannot be used on the unknown target. Other sampling methods often require expensive antibodies or dyes. Therefore, this resea ...

ELSEVIER SCIENCE SA2023

The JOREK non-linear extended MHD code and applications to large-scale instabilities and their control in magnetically confined fusion plasmas

Cristian Sommariva, Sun Hee Kim, Fang Liu

JOREK is a massively parallel fully implicit non-linear extended magneto-hydrodynamic (MHD) code for realistic tokamak X-point plasmas. It has become a widely used versatile simulation code for studying large-scale plasma instabilities and their control an ...

IOP Publishing Ltd2021

Overview of physics studies on ASDEX Upgrade

Olivier Sauter, Basil Duval, Stefano Coda, Timothy Goodman, Benoît Labit, Federico Alberto Alfredo Felici, Alessandro Pau, Cristian Sommariva, Laurie Porte, Antoine Pierre Emmanuel Alexis Merle

The ASDEX Upgrade (AUG) programme, jointly run with the EUROfusion MST1 task force, continues to significantly enhance the physics base of ITER and DEMO. Here, the full tungsten wall is a key asset for extrapolating to future devices. The high overall heat ...

IOP Publishing Ltd2019

DIII-D research towards establishing the scientific basis for future fusion reactors

Olivier Sauter, Wilfred Anthony Cooper, Lorenzo Anton-Louis Talà, Terunobu Akiyama, Mario Ludovico Podesta, Dongbin Zhao, Zhixian Yan, Jeffrey Huang, Xin Yang, Richard Pitts

DIII-D research is addressing critical challenges in preparation for ITER and the next generation of fusion devices through focusing on plasma physics fundamentals that underpin key fusion goals, understanding the interaction of disparate core and boundary ...

IOP Publishing Ltd2019

Dependence on plasma shape and plasma fueling for small edge-localized mode regimes in TCV and ASDEX Upgrade

Olivier Sauter, Basil Duval, Stefano Coda, Timothy Goodman, Jean-Marc Moret, Duccio Testa, Patrick Blanchard, Holger Reimerdes, Benoît Labit, Christian Gabriel Theiler

IOP Publishing Ltd2019

Review of recent experimental and modeling advances in the understanding of lower hybrid current drive in ITER-relevant regimes

Olivier Sauter, Ambrogio Fasoli, Yiming Li, Basil Duval, Stefano Coda, Martinus Gijs, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard

Progress in understanding lower hybrid current drive (LHCD) at high density has been made through experiments and modeling, which is encouraging given the need for an efficient off-axis current profile control technique in burning plasma. By reducing the w ...

IOP Publishing Ltd2018

Lower hybrid current drive experiments with different launched wave frequencies in the EAST tokamak (vol 23, 102512, 2016)

Joan Decker, Jian Wang, Mingkui Wang, Fang Liu, Yong Yang

Amer Inst Physics2017

Performance of ITER Correction Busbar Conductor Samples CBCN2 and CBCN3

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Fang Liu, Bo Liu

The correction busbar (CB) conductors for the ITER project are being produced in China. The second China CB conductor sample (CBCN2, Phase II of conductor testing) and the third CB conductor sample (CBCN3, Phase III testing) were made of the WST NbTi stran ...

IEEE Institute of Electrical and Electronics Engineers2016

Conductor Performance of CCCN3, CCCN4 and CCCN5 Samples for ITER CC Coils

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Fang Liu, Bo Liu

The conductor for the ITER Correction Coils (CC) is manufactured in China and is tested in the SULTAN facility. The third China CC conductor for the qualification SULTAN test sample (CCCN3) was prepared from a 200 m long CC conductor unit length (Phase II) ...

IEEE Institute of Electrical and Electronics Engineers2016