Berke Erbas
Recently, two-dimensional (2D) material based gas sensing, especially transition metal dichalcogenide-based sensing, has been widely investigated thanks to its room temperature sensing ability. Unlike metal oxide based sensors, 2D material-based sensing can be carried out without a heater, therefore it reduces the power consumption and makes them promising candidates for smartphones and wearable electronic devices. Besides gas sensing ability, these 2D materials are interesting and promising candidates for electronics and optoelectronics applications. For example, monolayer molybdenum disulfide (MoS2), which is a 2D semiconductor with direct bandgap, is one of the promising candidates for transistor but it has low mobility compared to silicon. To replace silicon-based devices, strain engineering of MoS2 is widely investigated. It is observed that tensile strain tunes the bandgap of MoS2, enhances carrier mobility and improves NO2 gas sensing by piezotronic effect. Different strategies have been used to strain MoS2 such as flexible substrates to stretch the exfoliated material on top of them, silicon/ dielectric substrates with surface roughness or silicon/dielectric substrates patterned with nanocone structure to locally strain transferred MoS2. Herein, field effect transistor with three-dimensionally patterned gate oxide is designed, fabricated and electrically characterized for sensing application. Thermal scanning probe lithography, which is a direct three-dimensional nanofabrication technique, is used for the fabrication of sinusoidal surfaces. By transferring the exfoliated MoS2 flakes on top of these sinusoidal gate oxide, biaxial strain is induced. Unlike counterparts, thermal scanning probe lithography-based patterning provides us design flexibility, which controls the direction of strain and the strain rate. As a result of Raman spectroscopy, the shifts in out-of-plane vibration (A1g) and in-plane vibration (E1 2g) modes are up to 0.87 cm−1 and 2.60 cm−1, respectively. According to the theoretical Raman spectra calculations of strained MoS2 [1], these shifts correspond to an average strain of 0.58% in a circular area with 1 μm diameter. The strain of 0.58% is obtained for a sinusoidal pattern having a 23 nm amplitude and a 440 nm period. Besides, as a result of photoluminescence characterization, it is shown that an average strain of 0.39% leads to a 35 meV redshift for A excitation peak position. Consequently, the strain of MoS2 on the surface patterned by thermal scanning probe lithography tunes the bandgap of MoS2 by 90.11 meV/%.
2021
