Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Hot tearing, a severe defect occurring during solidification, is the conjunction of tensile stresses which are transmitted to the mushy zone by the coherent solid underneath and of an insufficient liquid feeding to compensate for the volumetric change. In ...
L’apparition de fissures ou criques à chaud pendant la coulée des matériaux métalliques représente un défaut sérieux. L’EPF-Lausanne a développé un critère d’initiation de fissures qui est basé sur l’équation de conservation de la masse appliquée à la zone ...
Semi-continuous direct-chill (DC) casting of aluminium ingots suffers from a very frequent defect which can lead to a strong decrease in productivity: hot tearing. This phenomenon takes place in the mushy state (i.e., at solid fractions, gs, lower than uni ...
Hot tear formation has been observed during the solidification of a succinonitrile–acetone (SCN-acetone) alloy by pulling the columnar dendrites in the transverse direction with a stick. It is observed that the cracking of the mushy zone (hot tears) always ...
A fairly simple experimental setup has been designed for testing the resistance of the mushy zone of alloys during solidification under tensile conditions. It has been used to study the effect of coalescence among the solid grains at a late stage of solidi ...