Two-phase modelling of hot tearing in aluminium alloys using a semi-coupled method
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The aim of the present thesis is to provide a numerical tool for the mechanical modeling of dynamic failure in concrete. This widely used construction material is characterized by a non-linear failure behavior, which is consequently difficult to describe w ...
Intermetallic phases formation is one of the phenomena, which when coupled to thermal and mechanical strains leads to the premature wear of aluminium die casting tools made out of steel. This work focuses on two aspects of this wear problem. The first and ...
Timber Fabric structures (TFS) initiate from a correspondence between textile principles and recent industrial developments in producing cross laminated timber panels. Several individual timber strips are interlaced according to a pattern and result in an ...
Due to the variations in the local solidification conditions in typical industrial casting processes, dendrites grow under transient rather than steady-state conditions. In this study, the phase-field method was used to study the evolution of secondary den ...
Highly concentrated suspensions of silica particles present shear thickening properties, shifting from a low to a high viscosity state, instantly and reversibly at a critical shear rate. Their viscosity increases by up to 3 orders of magnitude, changing fr ...
The effect of deformation temperature and strain rate on the dynamic recrystallisation (DRX) behaviour of X70 pipeline steel was investigated. DRX parameters such as the critical and peak stresses and strains as well as the deformation activation energy we ...
To study the deformation and fracture of sandstone under static-dynamic coupled load, a cylindrical specimen under pre-static axial and confining pressure was dynamically loaded using an improved split Hopkinson pressure bar (SHPB). Through the application ...
The eutectic micro-constituent in SnAgCu solder governs the deformation behavior of the joint as it shows better deformation resistance than the Sn dendrites and occupies a high volume percentage of the whole solder. The main scope of this study is to deve ...
We present a process for the production of Cu-Al matrix composites containing between 25 and 30 vol.% in situ Al2O3. The composites are prepared by pressing, heat-treating and hot working blended powders of Cu, Al and CuO packed into copper alloy cans. The ...
The operation of a single Frank–Read (FR) source in the presence of a spatial stress gradient is studied using 3D discrete-dislocation dynamics (DDD) simulations and analytic models. Under a sufficiently large stress gradient, the FR source shows a new sta ...
