Punching shear strength of reinforced concrete slabs without transverse reinforcement
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Reinforced concrete slabs supported on columns fail by punching when a conical plug of concrete perforates the slab above the column. This failure has been mostly investigated experimentally, so what can numerical simulation contribute to understand this p ...
Buildings are very often horizontally stabilized by means of a core or by shear walls. Bridge girders are also often laterally restrained by a horizontal fixed support at the abutment. It follows that the columns of such systems are restrained against any ...
Punching shear of reinforced concrete flat slabs supported on columns is a failure mode in which the slab fractures around the column. This type of failure is sudden and can be catastrophic in nature. Punching shear generally governs the ultimate limit sta ...
This paper investigates the shear strength of beams and one-way slabs without stirrups based on the opening of a critical shear crack. The shear-carrying mechanisms after the development of this crack are investigated. On this basis, a rational model is de ...
The present paper presents an overview of the work of the RILEM Technical Committee 159-ETC on the engineering of the interfacial transition zone in cementitious composites. The object of this committee was to resolve the practical influences of the interf ...
Over the past century, the use of flat slabs in buildings and especially in parking garages has been growing as it is an economic and efficient solution. Flat slabs are easy to build and have, through their smaller depth, an economical and architectural ad ...
Punching of reinforced concrete and prestressed slabs is usually a critical failure mode for the design and verification of structures such as flat slabs or bridge slabs. Although codes of practice propose several rules for common cases (usually with an em ...
Reinforced concrete flat slabs are extensively used in buildings and parking garages. Their design is governed by deflection at the serviceability limit state and punching shear at the ultimate limit state. When no punching shear reinforcement is provided, ...
Punching of flat slabs without transverse reinforcement has mostly been investigated in the past for slabs with equal reinforcement ratios in the two directions and loaded under axis-symmetrical conditions. However, in practice, slab bridges as well as man ...
Bent-up bars were extensively used as shear reinforcement in beams and slabs from the first R/C developments up to the 1970’s. Their use was justified by the fact that they allowed enhanced development of the tensile reinforcement at the same time they act ...
