On the strain-hardening of tempered martensitic alloys
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Nanocrystalline metals have been an area of great interest in recent years due to their enhanced characteristics. One of the most striking is implied by the Hall-Petch relation: with decreasing grain size the material becomes stronger. This promise is fulf ...
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
The present work deals with the determination of mechanical properties of materials using instrumented indentation techniques. The main advantage of indentation testing is that it is relatively simple to perform and does not need any special and time-consu ...
In this study, the tensile and fracture properties and the microstructure of the reduced-activation tempered martensitic steel Eurofer97 have been investigated. This technical alloy is a 9%Cr steel developed within the European fusion material research pro ...
Interface delamination during indentation of micron-scale ceramic coatings on metal substrates is modeled using discrete dislocation (DD) plasticity to elucidate the relationships between delamination, substrate plasticity, interface adhesion, elastic mism ...
Aeroelastic tailoring requires structural compliance and thus often conflicts with stiffness requirements to carry prescribed aerodynamic loads. Recently however, the application of cellular structural concepts has suggested the potential to achieve compli ...
Bending behaviour of members without ordinary reinforcement made of quasi-brittle materials (such as concrete or fibre-reinforced concrete) is subjected to size effect both in terms of strength and ductility. For a typical ultra-high performance fibre-rein ...
Ultra High Performance Concrete (UHPC), Second International Symposium on Ultra High Performance Concrete2008
Ultra High Performance Fibre Reinforced Concretes (UHPFRC) combine outstanding protective (extremely low permeability) and mechanical (high tensile strength and significant tensile strain hardening) properties. These materials can be used in composite UHPF ...
Recently, fiber reinforced cementitious materials with novel properties have been developed. Here, novel properties mean “high tensile strain capacity with strain hardening and multiple fine cracks” and “high durability due to dense matrix with extremely l ...
Molecular dynamics is used to examine the deformation and failure of Al-Si interfaces and of nanocomposites consisting of Al and Si nanograins loaded in tension. The modified embedded atom method, is used to describe the forces and energies in the system a ...
