An analytical and experimental investigation on the normal grain growth in metals using the Monte Carlo method
Publications associées (78)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The microstructure stability during δ sub-solvus annealing in Inconel 718 was investigated, focusing on the conditions that may lead to the development of very large grains (about 100 μm) in a recrystallized fine grained matrix (4 to 5 μm) despite the pres ...
Hot tearing is a major defect of solidification processes and welding. It occurs in metallic alloys while they are in the semi-solid state and is caused by a lack of liquid feeding in the mushy zone to compensate solid network openings due to tensile and s ...
Oxide dispersion strengthened (ODS) steels are very promising materials for nuclear applications. In thispaper, the hot working behavior of ODS ferritic steels, consolidated by hot extrusion, is studied through torsion tests. Three ODS steels are produced ...
Recently, we have shown that minute Cr additions (typically 0.1 wt%) to Al-Zn alloys solidified in a uniform temperature field lead to the formation of fine equiaxed fcc Al grains [1]. Furthermore, these grains exhibit an unexpectedly large number of twin, ...
Fatigue damage accumulation and failure of steel reinforcement bars (rebars) is a stochastic process. Scatter can be influenced by the sensitivity of the short crack growth to the microstructural features, especially near the fatigue limit. This work inves ...
Grain-boundary character distributions (GBCDs) were determined for spark plasma sintered Y- and La-doped aluminas prepared at temperatures between 1450 degrees C and 1600 degrees C. La doping leads to grain boundaries that adopt (0001) orientations 3.7 tim ...
Under certain circumstances abnormal grain growth occurs in Nickel base superalloys during thermomechanical forming. Second phase particles are involved in the phenomenon, since they obviously do not hinder the motion of some boundaries, but the key parame ...
Transition element dopants (e.g., Y, La) are commonly used as sintering aids in polycrystalline alumina ceramics, which segregate to the grain boundaries and control the grain-boundary mobility. However, due to the extremely thin (
In this paper, the results of a 2D full field grain growth model are compared with several 2D mean field grain growth models (Burke and Turbull model and Hillert/Abbruzzese model), using simplified assumptions of isotropic grain boundary energy and mobilit ...
[001]-Oriented barium titanate (BaTiO3) ceramics were prepared by templated grain growth using [001]-oriented plate-like template BaTiO3 particles, synthesized via the molten salt method. Platelets synthesized in a 2-step or 3-step molten salt were used in ...