On the relationship between the microstructure and the mechanical properties of an ODS ferritic/martensitic steel
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The fracture properties of the tempered martensitic steel Eurofer97, which is among the main candidates for fusion power plant structural applications, were studied with two sizes of pre-cracked compact specimens (0.35T C(T) and 0.87T C(T)). The fracture t ...
Using a spherical aberration (Cs)-corrected scanning transmission electron microscopy (STEM) and electron energy-loss spectroscopy (EELS), we Investigated a 6 degrees low-angle [001] tilt grain boundary in SrTiO(3). The enhanced spatial resolution of the a ...
Transmission electron microscopy (TEM) has been used to investigate the effect of laponite clay on microdeformation in thin latex-based polystyrene (PS) films, in which the laponite was concentrated at the original interfaces between the PS particles. At r ...
Twinned dendrite growth has been found to occur in aluminum alloys when critical thermal conditions (G approximate to 100 K/cm, nu(s) approximate to 1 mm/s) and a slight convection in the melt are present during directional solidification. Split in their t ...
Minerals, Metals & Materials Soc, 184 Thorn Hill Rd, Warrendale, Pa 15086-7514 Usa2009
Two zirconium alloys (Zr-2.5%Nb) - one oxidized in a pressurized water reactor, the other oxidized in autoclave and used as reference - are analyzed by combining synchrotron-based scanning transmission and fluorescence X-ray microscopy and micro-X-ray abso ...
Two types of oxide dispersion strengthened (ODS) ferritic steels, with the composition of Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) (in weight percent), have been produced by mechanically alloying elemental powders of Fe, Cr, W, and Ti with Y2O3 particles either in arg ...
Magnesium matrix composites made of pure (99.98%) magnesium reinforced with long carbon (Mg/C) and stainless steel (Mg/steel) fibers were processed by low pressure infiltration method. Mg/C composites were then oriented from the crystallographic point of v ...
This thesis aims to find, for the first time, a direct relation between the size and morphology of small metallic nanostructures (gold in this case) supported on a metal-oxide surface to their catalytic activity. In this perspective, three main topics have ...
Significant progress has been achieved in the international research effort on reduced activation ferritic/martensitic steels for fusion structural applications. Because this class of steels is the leading structural material for test blankets in ITER and ...
Mechanical-loss measurements were performed in three grades of martensitic high-carbon tool steels. These steels were treated under carburizing gas before quenching, in order to vary the concentration of interstitial carbon in the martensite, as assessed b ...
