Analysis of nano-sized irradiation-induced defects in Fe-base materials by means of small angle neutron scattering and molecular dynamics simulations
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Titanium alloys are considered as potential candidate structural materials for the first wall, the blanket and the magnetic coil structures of fusion reactors. Titanium alloys are interesting materials because of their high specific strength and low elasti ...
The long term European materials R&D programme is mainly focused on the development of the following DEMO relevant materials: structural (RAFM steel called EUROFER), plasma facing (W alloy), breeder and neutron multiplier (Pb-17Li, Li4SiO4, Li2TiO3 and Be) ...
Examples of significant fusion materials R&D accomplishments are summarized for three general categories: (1) Fundamental studies of radiation-induced defects and their effects on material properties, (2) development of improved materials, and (3) developm ...
Cascade damage simulations in a 12 nm nanocrystalline Ni sample are presented. Sinks present in the sample such as grain boundaries and vacancy defects influence the movement of self-interstitial atoms (SIAs). Two temporal mechanisms of SIA activity during ...
Reduced activation martensitic steel specimens were irradiated by dual-beam from 0.1 to 50 dpa at 250 and 300 degreesC with 10 He appm/dpa. The in-situ microstructure observation shows that the bubbles were present after 1.7 dpa for 250 degreesC irradiatio ...
During the up and down cycles of a fusion reactor, the first wall is exposed concomitantly to a flux of energetic neutrons that generates radiation defects and to a thermal flux that induces thermal stresses. The resulting strains may exceed the elastic li ...
We characterize the transition structure at the Si(100)-SiO2 interface by addressing the inverse ion-scattering problem. We achieve sensitivity to Si displacements at the interface by carrying out ion-scattering measurements in the channeling geometry for ...
Synthesis of Pd nanoparticles with controlled size (d(Pd) = 1-3.6 nm) was carried out within the pores of the mesoporous HMS and SBA-15 silicas. Pd was ion-exchanged on non-calcined silicas, prepared by solvent extraction of the templates. A high concentra ...
Small specimen test technology (SSTT) has enabled, the development of fusion materials by efficiently using available irradiation volumes. The technology has also evolved in anticipation of the construction and operation of a high-energy neutron source for ...
Innovative structured catalysts based on nanoparticles of gold supported on activated carbon fibers (ACF) in the form of woven fabrics are presented for low-temperature CO oxidation. Gold was deposited by adsorption from aqueous solution of ethylenediamine ...
