Strategy to systematically design and deploy the ITER plasma control system: A system engineering and model-based design approach

Publications associées (29)

À propos
Confidentialité
Mentions légales

Graph Chatbot

Modeling high-entropy transition metal alloys with alchemical compression

Michele Ceriotti, Guillaume André Jean Fraux, Sandip De, Nataliya Lopanitsyna

Alloys composed of several elements in roughly equimolar composition, often referred to as high-entropy alloys, have long been of interest for their thermodynamics and peculiar mechanical properties, and more recently for their potential application in cat ...

AMER PHYSICAL SOC2023

Plasma-Assisted Hybrid Vapour Deposition Technology for Thin Film Fabrication

Caroline Hain

Continuous development of thin film deposition technologies is essential for the fabrication of films that meet the specific requirements of their target applications and working conditions. Therefore, it is necessary to increase the number of accessible a ...

EPFL2023

Interlocking modular microfluidic cooling substrates for future high energy physics experiments

Massimo Angeletti

In high energy physics, semiconductor-based sensors are widely used in particle tracking applications. These sensors are typically glued on low-mass cooling substrates, which guarantee the correct thermal management and, at the same time, minimise their in ...

EPFL2023

Collective data-based drawings A common ground for adaptive contributive design

The laboratory ALICE (Atelier de la Conception de l’Espace) at the École Polytechnique Fédérale de Lausanne (EPFL) advances a comprehensive approach to data-based drawing oriented towards architectural and urban co-design processes. This drawing methodolog ...

2023

The Case for Performance Interfaces for Hardware Accelerators

George Candea, Rishabh Ramesh Iyer, Jiacheng Ma, Aikaterini Argyraki

While systems designers are increasingly turning to hardware accelerators for performance gains, realizing these gains is painstaking and error-prone. It can take several person-months to determine if a given accelerator is a good fit for a given piece of ...

2023

Data-driven IQC-Based Robust Control Design for Hybrid Micro-disturbance Isolation Platform

Alireza Karimi, Vaibhav Gupta, Elias Sebastian Klauser

A novel approach for robust controller synthesis, which models uncertainty as an elliptical set, is proposed in the paper. Given a set of frequency response functions of linear time-invariant (LTI) multiple-input multiple-output (MIMO) systems, the approac ...

IEEE2023

Human Interactive Robotic Surfaces for Physical Immersion

Fabio Zuliani

Computers have long been augmenting human capabilities and communication, and with emerging technologies, physical immersion in virtual worlds is now attainable. These advancements push the boundaries of human potential, allowing designers, architects, eng ...

EPFL2023

Interactive design with optimum matchmaking of reused structural elements – a software implementation

Corentin Jean Dominique Fivet, Jonas Warmuth, Jan Friedrich Georg Brütting

Structural systems are a significant contributor to buildings’ embodied carbon and reusing structural elements in new load-bearing applications is one strategy to reduce this impact. However, integrating this approach into existing design workflows without ...

International Association for Shell and Spatial Structures (IASS)2023

Dynamic pulse scheduling in ASDEX Upgrade: Disruption avoidance and investigation of the H-Mode density limit

Federico Alberto Alfredo Felici, Alessandro Pau, Bernhard Sieglin

Operation of a tokamak device requires the coordinated operation of a multitude of systems. The sequence of operations during a discharge is both too complex and fast for human interaction. A common way of operation is a predefined sequence of operations w ...

2023

Page 3 sur 3