Intermediate temperature grain boundary phenomena in copper alloys
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Gamma titanium aluminide (γ-TiAl) based alloys are very interesting materials for structural applications at elevated temperatures owing to the combination of high specific strength, good oxidation, creep and fatigue resistance. However, their relatively p ...
This paper describes the microstructure, tensile properties and Charpy impact resistance of a reduced activation oxide dispersion strengthened ferritic steel Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) produced by mechanical alloying of a pre-alloyed, gas atomised steel ...
We present Molecular Dynamics (MD) simulations of the shear–coupled migration behaviour of a Σ 17(530)/[001] symmetrical tilt boundary, in the absence or in the presence of nanocracks lying on the grain boundary (GB) plane. The simulations have been perfor ...
The formation of feathery grains during semi-continuous casting of Al-alloys [1, 2] is an interesting problem from both practical and theoretical points of view. These structures are formed by a lamellar sequence of twinned and untwinned regions separated ...
In finite element simulations dedicated to the modelling of microstructure evolution, the mesh has to be fine enough to: (i) accurately describe the geometry of the constituents; (ii) capture local strain gradients stemming from the heterogeneity in materi ...
In order to deeply understand the high temperature deformation behaviors of Cu-0.23%Al2O3 (volume fraction) alloy, the changes of flow stress and microstructure for this alloy after deformation at high temperatures were investigated by using the Gleeble-15 ...
Since the end of the last century, Cu damascene integration scheme has been the favoured choice for advanced interconnect technologies. Indeed, due to the lowest Cu bulk resistivity and to it higher resistance to electromigration, performances enhancement ...
The dihedral angle shown by intergranular lead inclusions in Cu-1 wt.% Pb alloys is measured varying the purity of the metal and the temperature. Several measurement methods are used and compared, namely classical two-dimensional (2D) methods based on meta ...
This thesis is focused on the properties of microcellular aluminium, produced by replication processing, at the micro, meso and macrostructural level. The replication process is based on the infiltration of a porous sodium chloride (NaCl) perform with molt ...
Two types of oxide dispersion strengthened (ODS) ferritic steels, with the composition of Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) (in weight percent), have been produced by mechanically alloying elemental powders of Fe, Cr, W, and Ti with Y2O3 particles either in arg ...
