Intermediate temperature grain boundary phenomena in copper alloys
Publications associées (343)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Twinned dendrite growth has been found to occur in aluminum alloys when critical thermal conditions (G approximate to 100 K/cm, nu(s) approximate to 1 mm/s) and a slight convection in the melt are present during directional solidification. Split in their t ...
Minerals, Metals & Materials Soc, 184 Thorn Hill Rd, Warrendale, Pa 15086-7514 Usa2009
Hot-dip galvanized Zn-0.2wt%Al coatings on steel sheets exhibit a strong basal texture ({0001} parallel to the sheet plane). Part of this texture call be explained by the faster growth of < 10 (1) over bar0 > dendrites as compared with < 0001 >, granting b ...
Minerals, Metals & Materials Soc, 184 Thorn Hill Rd, Warrendale, Pa 15086-7514 Usa2009
The influence of the coordination on the Kondo temperature of a magnetic impurity at a noble metal surface and the line shape observed in low temperature scanning tunneling spectroscopy (STS) is investigated for single cobalt atoms adsorbed on and embedded ...
A fairly simple experimental setup has been designed for testing the resistance of the mushy zone of alloys during solidification under tensile conditions. It has been used to study the effect of coalescence among the solid grains at a late stage of solidi ...
The aim of this paper is to report the very first in situ observations of the deformation behaviour of an Al-Cu alloy in the semisolid state by using ultrafast, high-resolution X-ray microtomography. It is shown that this deformation is non-homogeneous and ...
Uniform Material Law (UML) is a handy and user-friendly method since only the tensile strength data of the material is needed for estimation of the strain-life curve, in contrast to other methods, such as four-point correlation method, universal slopes met ...
Aluminum zinc alloys constitute an important class of wrought alloys, the so-called 7000 series, and are also widely used as anti-corrosion coatings of steel sheets. They are also interesting from a more fundamental point of view because zinc, a hexagonal ...
The anisotropy of the solid-liquid interfacial energy, gamma(sl), plays a key role in the accurate prediction of growth morphologies in metallic alloys. This interfacial energy anisotropy can vary duo to alloy composition, especially when that of the pure ...
Minerals, Metals & Materials Soc, 184 Thorn Hill Rd, Warrendale, Pa 15086-7514 Usa2009
In the quest of materials for the first wall of the future fusion reactor, it has been shown that oxide dispersion strengthened (ODS) ferritic / martensitic (F/M) steels appear to be promising candidates. The inherent good mechanical properties supported b ...
Materials consisting of grains or crystallites with sizes below a hundred nanometers have exhibited unique physical and mechanical properties in comparison to their coarse-grained counterparts. As a result, considerable effort has been put into uncovering ...