Phase Transformations in 18-Carat Gold Alloys Studied by Mechanical Spectroscopy
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
A theory to predict the initial flow stress of an arbitrary N-component fcc random alloy is extended to predict the additional strengthening when a dilute concentration of a substitutional element is introduced. Assuming properties for the N-component allo ...
Integrated circuit packaging technology has become a prime design consideration for the develop-ment of electronic system concepts. One key issue is the bonding layer between chip and substrate. Currently, high-lead solder materials are being used, which a ...
New BMGs exhibiting strong glass forming ability combined with high hardness have been developed based on the Pt-Si-B ternary system. The effects of partial substitution of platinum by transition metals of the group iron, cobalt, nickel, and copper, as wel ...
The non-isothermal aging behaviour of a newly developed Al–Zn–Mg–Cu alloy containing 17 wt-% Zn was investigated. Hardness and shear punch tests demonstrated that during nonisothermal aging, the mechanical properties of the alloy first increased and then d ...
Annealing of supersaturated AA3xxx alloys at low temperatures usually results in sluggish recrystallization kinetics. This is due to the joint effect of the following factors: low nucleation rate, reduced grain boundary mobility, and large amount of fine p ...
The temperature-dependent flow behavior in nominally binary Al-Mg alloys measured recently (Jobba etal., 2015; Niewczas et al., 2015) is interpreted in the context of a parameter-free solute strengthening model. The recent measurements show consistently hi ...
The high temperature behavior of solute strengthening has previously been treated approximately using various scaling arguments, resulting in logarithmic and power-law scalings for the stress-dependent energy barrier Delta E(tau) versus stress tau. Here, a ...
The effects of thermal treatments on a Co-Ni-Cr super-alloy in the temperature range from 250 degrees C to 900 degrees C, resulting in secondary hardening, have been studied by Mechanical Spectroscopy. The simultaneous evolution of the internal friction sp ...
This study concerns the evolution of the thermomechanical properties of new high-performance materials. In particular, we focus on the relationship between the microstructure and the mechanical properties of a superalloy based on Co-Ni-Cr. Superalloys are ...
It has been shown recently that minute additions of Cr in Al-Zn alloys refine the solidified grain structure and induce multiply-twinned grains which can only be explained if the icosahedral symmetry is considered (Kurtuldu et al., 2013). It has been sugge ...
