Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This thesis presents an investigation aimed at the understanding of the effect of interfacial energy anisotropy on growth morphologies in Al-Zn alloys. Most low alloyed metals form dendritic structures that grow along directions that correspond to low inde ...
Heterogeneous nucleation is governed by the interplay of interfacial energies between a substrate, a solid and a liquid. Although the intensity of these energies can strongly change with the orientation of the nucleus for anisotropic media, this parameter ...
Electrochemical and friction measurements during unidirectional sliding tests are used to monitor and to evaluate the tribocorrosion behavior of a passivating material. Tribocorrosion is the interplay between chemical, electrochemical, and mechanical proce ...
Hot-dip galvanized Zn-0.2wt%Al coatings on steel sheets exhibit a strong basal texture ({0001} parallel to the sheet plane). Part of this texture call be explained by the faster growth of < 10 (1) over bar0 > dendrites as compared with < 0001 >, granting b ...
Minerals, Metals & Materials Soc, 184 Thorn Hill Rd, Warrendale, Pa 15086-7514 Usa2009
The microstructural evolution of deformed 304L stainless steel during static recrystallization and grain growth was characterized by EBSD within an SEM chamber, which enabled microstructural and crystallographic information to be determined. The experiment ...
This paper presents numerical analysis of an in-plane resonant nano-electro-mechanical (NEM) sensor based on mass-detection principle using a 3D FEM electromechanical simulation combined with a NEM/MOS hybrid circuit simulation. The self-assembled linker m ...
Micropores formed in Al-Cu alloys cast under controlled conditions have been analyzed using high-resolution X-ray tomography. The influence of inoculation conditions, copper content, cooling rate and initial hydrogen content on the morphology of pores has ...
Five ternary Sn-0.7Cu-xNi alloys with nickel contents in the range 0-1000 ppm have been directionally solidified at different growth rates. The competition between primary tetragonal Sn cells/dendrites, eutectic and primary Cu6Sn5 is interpreted with phase ...
The anisotropy of the solid-liquid interfacial energy plays a key role during the formation of as-solidified microstructures. Using the xi-vector formalism of Cahn and Hoffman, this contribution presents the effect that anisotropy has on the equilibrium sh ...
A systematic study of the solidification mechanisms of binary Sn-Cu and ternary Sn-Cu-Ni alloys has been carried out. It is found that Sn-Cu is a weakly-irregular eutectic system with Cu6Sn5 as the leading phase. Interestingly, two different eutectic morph ...
