Numerical investigation by finite element simulations of the ball punch test: Application to tempered martensitic steels
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The fracture properties of the tempered martensitic steel Eurofer97, which is among the main candidates for fusion power plant structural applications, were studied with two sizes of pre-cracked compact specimens (0.35T C(T) and 0.87T C(T)). The fracture t ...
The goal of this project was to develop low-firing thick-film materials systems for the fabrication of piezoresistive sensors on special steels, for the fabrication of instrumented medical devices. To this end, a series of individual thick-film materials a ...
Five different grain sizes are produced in 0.17 wt% carbon steel using varying rates of cooling from austenitization temperatures. Controlled furnace cooling from 1100 °C and 950 °C produces coarse ferrite grains of 40 µm and 32 µm diameter, respectively, ...
Intergranular penetration of liquid 18 K gold into a superaustenitic stainless steel, which occurs during laser welding of these two materials, has been studied using a C-ring device which can be put under tensile stresses by a screw. It is shown that liqu ...
This paper proposes a simple but powerful approach to determine the constitutive equation of tempered martensitic steels from micro-hardness tests. Finite element simulations were used to investigate the plastic flow in the contact region between the tip a ...
The effect of deformation temperature and strain rate on the dynamic recrystallisation (DRX) behaviour of X70 pipeline steel was investigated. DRX parameters such as the critical and peak stresses and strains as well as the deformation activation energy we ...
This work is motivated by the industrial need to improve the thermal treatments of carbon steels used for the production of files. It aims at clearly defining the role that carbon plays in hardness and wear resistance of files. Three steel grades with diff ...
The paper presents the microstructure and mechanical properties of an oxide dispersion strengthened (ODS), reduced activation, ferritic steel, namely the Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) alloy, which was fabricated by hot isostatic pressing followed by high sp ...
In this work we have studied brittle fracture in high-chromium reduced activation tempered martensitic steels foreseen as structural materials for thermonuclear fusion reactors. Developing the adequate materials that can withstand the severe irradiation co ...
As the upper temperature for use of reduced activation ferritic/martensitic steels is presently limited by a drop in mechanical strength at about 550 degrees C, Europe, Japan and the US are actively researching steels with high strength at higher operating ...
