L'HYDROPTERE: HOW MULTIDISCIPLINARY SCIENTIFIC RESEARCH MAY HELP BREAK THE SAILING SPEED RECORD

Robin Amacher, Luc Blecha, Guillaume Bonnier, Olivier Braun, Martin Calmon, Joël Cugnoni, Michel Deville, Stéphane Dyen, Mohamed Farhat, Pascal Fua, Jan-Anders Månson, Véronique Michaud, Davy Moyon, Marc Oggier, Mark Sawley, Daniel Schmäh, Antoine Sigg
RINA, 2010
Article de conférence

Résumé

In 2009, l’Hydroptère broke the symbolic barrier of 50 knots and became the world fastest sailing boat over both 500 meters and 1 nautical mile. This major achievement relied on the high skills of the sailing team but also on technical advances of the boat, resulting from the scientific collaboration between the Hydroptère Design Team and the Ecole Polytechnique Fédérale de Lausanne (EPFL). In the present article, we highlight the multidisciplinary research activity performed within EPFL in the course of this collaboration involving aero- and hydrodynamics, materials and structure as well as computer vision. Various foils were tested at reduced scale in a high speed water tunnel, and the results used to validate the numerical simulations. Composite materials, their processing parameters and assembly components were tested. The structural behaviour was also investigated to determine strains and stresses in normal and extreme sailing conditions, taking waves into account, and a combined model was derived for dynamic simulation. Finally, advanced computer vision methods were developed and implemented on the boat to monitor foil immersion and cross beams deformations.

Official source

https://infoscience.epfl.ch/record/149169?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

This thesis deals with the modelling of fundamental aspects of the mission engineering, the physics, and the constraints of atmospheric entry of space vehicles. The aim of this work is to formulate a coupled approach for the modelling and the simulation of thermal fluid-structure interaction in atmospheric entries, taking into account the thermochemical and physical response of the material composing the solid structure. Numerous missions that aim to explore planets, comets or regions outside our galaxy are planned for the next few years. During the phase of entry into the atmosphere of a planet or a moon, space vehicles encounter extreme heating conditions that can damage the structure and the on-board equipment. A Thermal Protection System (TPS) is hence installed to insulate the vehicle’s internal parts from high temperatures and heat fluxes. Ablative materials, which are composed of high-temperature resistant fibre porous structure filled with an organic matrix, are often used to manufacture heat shields of high speed entry vehicles. The hot gas around the spacecraft transfers energy fluxes to the vehicle through the fluid-structure interface. The solid then reacts, with part of the heat being conducted in the deeper layers of the material, and part being absorbed by physical and chemical transformations of the material itself. The organic phase of the ablative material evaporates – this process is called pyrolysis – and these gases are blown into the outer flow, creating thus a protective layer. Moreover, the surface of the TPS may react with the atmospheric gases, consuming in this way a fraction of the material. A model for these two phenomena and the thermal fluid-structure interaction is proposed in this thesis. Numerical simulations are one of the most widely used tools to design the TPS, and a detailed mathematical model allows to reduce margins in the sizing. Atmosphere gases and the spacecraft structure form two distinct systems that interact through the external surface of the TPS, and through which energy and mass exchanges occur. Many computational tools exist to simulate the physics of each of the two domains. A higher level of accuracy is however achieved if the problem is approached in a coupled fashion, where each system takes into account the thermophysical response of the other. An innovative coupling algorithm, which includes the direct evaluation of the surface chemistry, is presented in this thesis. Using this coupling procedure, numerical simulations of the TPS of a European Space Agency project are performed and key parameters for the sizing of the heat shield are evaluated and discussed.

EPFL2013

Chargement

Parametric numerical investigation of adhesive laminated point connections

Jean-Paul Lebet, Pieter Christian Louter, Manuel Santarsiero

The recent demand for architectural transparency has drastically increased the use of glass material for structural purpose. However, connections between structural glass members represent one of the most critical aspects of glass engineering, due to the fragile behaviour of this material. In that regard, research activities on a novel type of metal-to-glass adhesive connections (called laminated connections) are currently on-going at EPFL. These joints make use of transparent thin polymer foils - i.e. an ionomer polymer (SentryGlas® from Dupont) and a structural silicon (TSSA from Dow Corning) – that are cured by an autoclave lamination process. The research activities involve both experimental and numerical studies with the aim to develop a design model and failure criterion for laminated connections. In this paper, the nonlinear numerical investigations on the behaviour of this type of adhesive joints are presented. In particular, the effects of mechanical and geometrical parameters on the response of the laminated connections are studied by non-linear modeling. The results are obtained performing several numerical simulations varying the parameters’ values and monitoring the related effects. Strong non-linearity in both strain and stress field distributions are observed, even in case of simple load conditions. The results suggest that, with the purpose of performing numericalexperimental comparisons, precise measurements have to be performed since very small displacements are to be expected. Additionally, an appropriate modeling of both boundary conditions (realized by the test setup) and adherents’ deformations (of both steel and glass adherent) is necessary.

Taylor & Francis Group2013

Chargement

Arrested demixing opens route to bigels

Maxim Belushkin, Nicolas Dorsaz, Giuseppe Foffi, Francesco Varrato

Understanding and, ultimately, controlling the properties of amorphous materials is one of the key goals of material science. Among the different amorphous structures, a very important role is played by colloidal gels. It has been only recently understood that colloidal gels are the result of the interplay between phase separation and arrest. When short-ranged attractive colloids are quenched into the phase-separating region, density fluctuations are arrested and this results in ramified amorphous space-spanning structures that are capable of sustaining mechanical stress. We present a mechanism of aggregation through arrested demixing in binary colloidal mixtures, which leads to the formation of a yet unexplored class of materials-bigels. This material is obtained by tuning interspecies interactions. Using a computer model, we investigate the phase behavior and the structural properties of these bigels. We show the topological similarities and the geometrical differences between these binary, interpenetrating, arrested structures and their well-known monodisperse counterparts, colloidal gels. Our findings are supported by confocal microscopy experiments performed on mixtures of DNA-coated colloids. The mechanism of bigel formation is a generalization of arrested phase separation and is therefore universal.

Natl Acad Sciences2012

Chargement

EPFL2013